|
|
![]() |
#1 |
VIP Member
Join Date: Apr 2003
Location: Tulsa, Oklahoma
Posts: 1,671
Likes: 3,860
Liked 801 Times in 338 Posts
|
![]()
I am not sure but I think Ray may have been the guy that used to work for Indy and do heads and blocks in house.
|
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Mar 2016
Location: Crete, IL
Posts: 167
Likes: 260
Liked 54 Times in 24 Posts
|
![]()
There is also Tri-state cylinder Head in Evansville that does furnace cast iron welding
__________________
Todd Gross 3323 FS/E,F |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Jan 2016
Location: Colorado hills
Posts: 123
Likes: 11
Liked 73 Times in 36 Posts
|
![]()
Folks interested in this kind of stuff -
Well, this place is not located in Indiana but........ ![]() One of the best kept secret places that welds cast iron parts is located in Cambridge, IA. Schell Welding (515)383-4830. Their work is not only impressive, it is done so well, one cannot see where the welding was done (after machining). Now that the kitty is out of the bag, the rest is on you. Good Luck as you think with creativity. ![]() Dissident ![]() |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Apr 2005
Posts: 494
Likes: 6
Liked 25 Times in 16 Posts
|
![]()
Thanks for the additional resources. It seems they are all in the Indiana/Iowa area. My guy used Al Mathon for years. His son didn't want to continue the welding shop from what I was told. One of his customers blew the bottom out of a Turbo Buick V6 by swapping computers and not checking the timing. Cracked the main webs, bent the pins, cracked the Bryant crank, etc.
__________________
Mopar 2 Ya! |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Jun 2005
Location: Albert Lea, MN
Posts: 52
Likes: 3
Liked 20 Times in 9 Posts
|
![]()
[QUOTE=Dissident;554468]Folks interested in this kind of stuff -
Well, this place is not located in Indiana but........ ![]() One of the best kept secret places that welds cast iron parts is located in Cambridge, IA. Schell Welding (515)383-4830. Their work is not only impressive, it is done so well, one cannot see where the welding was done (after machining). Now that the kitty is out of the bag, the rest is on you. X 2 on Schell Welding. Have used them many times with some amazing results! |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|