Trans shields for 2018

SSDiv6 · 03-03-2018, 09:43 PM

Both the transmission rigid shields and blankets must meet the requirements of SFI Spec 4.1.
The transmission rigid shield must be inspected every 5 years and the blanket, every 2 years.

http://www.sfifoundation.com/wp-cont...4.1_032713.pdf

List of approved blanket suppliers:
http://www.sfifoundation.com/wp-cont...le%20type).pdf

List of approved shield suppliers:
http://www.sfifoundation.com/wp-cont...id%20type).pdf

Approved T-200 Shield:
https://racecarpartsdepot.com/shop?o...ic-3-speed-new

Bill Moulding · 04-20-2018, 11:13 AM

I just installed a trans shield for my 4th gen Camaro on a metric 200. Came from Tom Waters Race Car Products. It bolts on to two brackets (supplied) that attach to each side of the pan rail. No twisty straps. Fits real nice and did it with the trans in the car. They can be reached at 407-240-8626. Bill Moulding

Darrel Goheen · 04-20-2018, 12:59 PM

Quote:

Originally Posted by Bill Moulding

I just installed a trans shield for my 4th gen Camaro on a metric 200. Came from Tom Waters Race Car Products. It bolts on to two brackets (supplied) that attach to each side of the pan rail. No twisty straps. Fits real nice and did it with the trans in the car. They can be reached at 407-240-8626. Bill Moulding

Hi Bill, thanks for the info. Do you have any installed photos?

Everett Vassar · 04-20-2018, 01:18 PM

I got my blanket from Ken Keir just in time to throw it in the trailer and install at the track the next morning. Was easy enough to get on my metric 200 and I have the brace. I need to re do it just a little better but it's fine. Ken is a racer too and very easy to work with.

MR DERBY CITY · 04-20-2018, 05:30 PM

Quote:

Originally Posted by Bill Moulding

I just installed a trans shield for my 4th gen Camaro on a metric 200. Came from Tom Waters Race Car Products. It bolts on to two brackets (supplied) that attach to each side of the pan rail. No twisty straps. Fits real nice and did it with the trans in the car. They can be reached at 407-240-8626. Bill Moulding

Thanks Bill, just curious, Do you run a brace ? Do you use a cheetah shifter ? You had better results than a lot of guys....MJ...

03-03-2018, 09:43 PM	#1
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,045 Likes: 712 Liked 1,604 Times in 583 Posts	Re: Trans shields for 2018 Both the transmission rigid shields and blankets must meet the requirements of SFI Spec 4.1. The transmission rigid shield must be inspected every 5 years and the blanket, every 2 years. http://www.sfifoundation.com/wp-cont...4.1_032713.pdf List of approved blanket suppliers: http://www.sfifoundation.com/wp-cont...le%20type).pdf List of approved shield suppliers: http://www.sfifoundation.com/wp-cont...id%20type).pdf Approved T-200 Shield: https://racecarpartsdepot.com/shop?o...ic-3-speed-new

04-20-2018, 11:13 AM	#2
Bill Moulding Junior Member Join Date: Feb 2006 Posts: 58 Likes: 0 Liked 3 Times in 3 Posts	Re: Trans shields for 2018 I just installed a trans shield for my 4th gen Camaro on a metric 200. Came from Tom Waters Race Car Products. It bolts on to two brackets (supplied) that attach to each side of the pan rail. No twisty straps. Fits real nice and did it with the trans in the car. They can be reached at 407-240-8626. Bill Moulding

04-20-2018, 01:18 PM	#4
Everett Vassar Member Join Date: Jun 2004 Location: Kennedale,Tx Posts: 227 Likes: 0 Liked 2 Times in 2 Posts	Re: Trans shields for 2018 I got my blanket from Ken Keir just in time to throw it in the trailer and install at the track the next morning. Was easy enough to get on my metric 200 and I have the brace. I need to re do it just a little better but it's fine. Ken is a racer too and very easy to work with.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode