|
|
|
|
04-21-2018, 09:48 AM
|
#1 |
|
Junior Member
Join Date: Feb 2006
Posts: 58
Likes: 0
Liked 3 Times in 3 Posts
|
Re: Trans shields for 2018
Darrell sorry I never took any pics. I had the use of a friends hoist and its back in the trailer now.
MJ I use a B&M Prostick and its trans bracket went on with the same bolts as the shield bracket (with some light massage). No brace. Bill Moulding |
|
|
|
04-21-2018, 10:17 AM
|
#2 | |
|
VIP Member
Join Date: Feb 2014
Location: Derby City, USA
Posts: 3,645
Likes: 1,085
Liked 7,951 Times in 1,523 Posts
|
Re: Trans shields for 2018
Quote:
|
|
|
|
|
04-21-2018, 11:09 AM
|
#3 |
|
Member
Join Date: Mar 2007
Location: Grosse Ile Mi.
Posts: 316
Likes: 84
Liked 13 Times in 7 Posts
|
Re: Trans shields for 2018
I also just installed the Tom Waters shield on my metric 200. I had a new brace made to allow the shield to fit. The new brace had a slight interference with the Lokar dipstick, so I also re located the dip stick to the location in front of the servo that was originally used for some sort of a kickdown cable. Masta Performance in Michigan makes a dipstick tube to fit this arrangement and it fits perfectly and has a bracket that bolts to the bellhousing. It is Masta's P/N 200TV.
I use a Hurst Quarter stick and the cable bracket that mounts to the trans required some tweaking (grinding for clearance). |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
