|
|
![]() |
#1 |
Member
Join Date: Sep 2012
Posts: 120
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Greg, the reason I asked was your statement that the Dodge was the worst by a fair amount , I guess David's comments takes it to another level, kind of like the Harley's in pro stock bike. Thanks to David for offering that info.
Last edited by Dave Crysler; 09-09-2018 at 02:40 PM. Reason: added comment |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Jan 2002
Location: Houma, LA
Posts: 2,717
Likes: 2
Liked 325 Times in 50 Posts
|
![]()
David, David, David, I guess because you haven't outrun them lately now they need weight and you need to get some weight taken off. You think that thing you got came that way? Your ole Daddy tells me how many crates of parts Chevrolet sends you, and he tells me you can't get parts for a Dodge. Those are both quotes. From what I understand the Chevrolet you run is because yall couldn't get parts for the Dodges. Now I of all people understand the parts thing with Dodge. They got no parts unless you want a poster or something. Just cause they got out on you, don't get mad, get faster. You have the knowledge and the ability. This reminds me of Pro Stock when NHRA made everyone have the same weight pistons, rods, and other stuff as Greg Anderson. Sure didn't change much in Pro Stock. And you know how tricked out the other DSR Challenger is. You sold it to them. Maybe you should have kept it.
__________________
Jeff Teuton 4022 STK |
![]() |
![]() |
![]() |
#3 |
Sponsor
Join Date: Jun 2009
Location: Reading, PA
Posts: 199
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Jeff, this whole deal is nothing new, I tried to have it all stopped a year ago before it got out of hand. But I don't have enough political power to make a difference. Now that it's proven they are fast maybe something can be done about it. It makes us look weak but I'm not afraid to admit that I can't find another 100 HP and 5 MPH out of a Stock Eliminator engine. It's just not possible with the limitations we have. We are at a huge disadvantage and it's simply not fair.
This has nothing to do with Chevrolet sending us parts. I don't even know why you are bringing that up because it is off topic here. You obviously just want to sling dirt on me as usual. Just admit it, the Dodge's are running a bogus combination and you know it. I, on the other hand, am running the same engine that came in the car. |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Sep 2012
Posts: 120
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
...
Last edited by Dave Crysler; 09-09-2018 at 06:07 PM. Reason: ... |
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Apr 2012
Location: Connecticut
Posts: 1,125
Likes: 1,179
Liked 684 Times in 289 Posts
|
![]()
Does Joe Welch have the DSR stuff?
Mike A114 |
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: Jan 2002
Location: Houma, LA
Posts: 2,717
Likes: 2
Liked 325 Times in 50 Posts
|
![]()
I think Geoff Turk and the DSR cars have BES Power, Welch I think Mike Moran works for him or does his, and Chris Holbrook and Mike are close, and Roy does the motors on the car Allen Johnson drives which has shared ownership with me.
__________________
Jeff Teuton 4022 STK |
![]() |
![]() |
![]() |
#7 |
Member
Join Date: May 2010
Location: Coeymans, NY
Posts: 135
Likes: 215
Liked 128 Times in 33 Posts
|
![]()
After reading all posts thus far, Todd Hoven and David Barton make the most intelligent and informative points. Thank you for explaining to the non FSS racers (but still fans). Agree with the NHRA decision.
|
![]() |
![]() |
![]() |
#8 | |
VIP Member
Join Date: Apr 2012
Location: Connecticut
Posts: 1,125
Likes: 1,179
Liked 684 Times in 289 Posts
|
![]() Quote:
As a car owner, how important is the 9" tire rule to you? Thank you, Mike Last edited by Mike Jones; 09-09-2018 at 08:17 PM. |
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|