Stuck carb Jet

Mark Yacavone · 10-30-2018, 02:31 PM

Quote:

Originally Posted by Mike Jones

You might try "shocking" the threads with a punch and hammer, if you can get to it. Not too hard

...Or an impact driver with a long tip on it.

Makinchips · 10-30-2018, 03:02 PM

Put it in a pot of hot water on the stove. Do this when the wife isn't home.

ron mattson · 10-30-2018, 04:09 PM

Spray it with Minnesota fast freeze from
Goodson, it’s a freezing spray that will shrink the jet
Could warm the carb body then do it should
Make for easy removal.

71lemans · 10-30-2018, 06:44 PM

Lyn, let us know the results. I have tossed a couple of carbs for issues like this.

10-30-2018, 03:02 PM	#2
Makinchips Junior Member Join Date: Apr 2016 Posts: 26 Likes: 0 Liked 3 Times in 3 Posts	Re: Stuck carb Jet Put it in a pot of hot water on the stove. Do this when the wife isn't home.

10-30-2018, 04:09 PM	#3
ron mattson Member Join Date: Nov 2005 Location: cloquet mn Posts: 466 Likes: 17 Liked 67 Times in 30 Posts	Re: Stuck carb Jet Spray it with Minnesota fast freeze from Goodson, it’s a freezing spray that will shrink the jet Could warm the carb body then do it should Make for easy removal. __________________ Ron Mattson 5015 STK

10-30-2018, 06:44 PM	#4
71lemans Junior Member Join Date: Feb 2009 Posts: 35 Likes: 8 Liked 0 Times in 0 Posts	Re: Stuck carb Jet Lyn, let us know the results. I have tossed a couple of carbs for issues like this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode