Stocker machinist

Jeff Jewell · 12-06-2018, 03:33 PM

Quote:

Originally Posted by dragracerray

I very much miss my machinist. Bruce and Dave Ward of Rochester New York are excellent people that knew their craft. Bruce and Dave closed their shop last year. Now I am looking for a new machinist. My brother Ken and I are building a new short block. Who would you guys suggest in the northeast? Thanks in advance for the advice!
Ray

I can recommend Glenn Briglio from B&B Auto Machine in Oceanside, NY (Long Island). He's done a great job for me.

Frank Castros · 12-06-2018, 07:53 PM

Bill Ceralli Competition Engines, Paterson NJ. Impeccable machine work.

dragracer502 · 12-06-2018, 10:36 PM

Rob Becker
Becker Racing Engines
He is a Super Stock racer and a builder of record holding stocker motors. Just over the boarder from Buffalo, so you get a 30% discount on your bill 😁. You can ask around to your fellow Rochester area racers, The McGraths and The Ciras, they can vouch for the mans talent and character.
Message me if you'd like his contact info.
Frank F.
181 H/SA

STK1217 · 12-07-2018, 01:01 AM

Tilburg Racing Engines Trout Run PA.17771 570-998-2204
You will be lucky to find anyone better!

Bob Bender · 12-07-2018, 01:00 PM

Burtonsville Machine, call Bub he is great and fast. 301-490-3131

Steven Cappetta · 12-07-2018, 05:01 PM

Tom Boucher of Boucher's Racing Engines. Every time I go I walk out faster than when I went in. He is a Div 1 SuperStock racer and has been instrumental helping me tune. Vic Santos helps with the in-house Dyno testing. Over 40 years of experience building and racing.
http://www.bouchersracing.com/

dragracerray · 12-20-2018, 09:29 AM

Thanks guys! You came up with machinists I was not aware of. Merry Christmas, Ray

12-06-2018, 07:53 PM	#2
Frank Castros VIP Member Join Date: Nov 2001 Location: The Lowcountry. Posts: 3,011 Likes: 2,697 Liked 2,767 Times in 979 Posts	Re: Stocker machinist Bill Ceralli Competition Engines, Paterson NJ. Impeccable machine work.

12-06-2018, 10:36 PM	#3
dragracer502 Member Join Date: Nov 2008 Posts: 163 Likes: 6 Liked 10 Times in 8 Posts	Re: Stocker machinist Rob Becker Becker Racing Engines He is a Super Stock racer and a builder of record holding stocker motors. Just over the boarder from Buffalo, so you get a 30% discount on your bill 😁. You can ask around to your fellow Rochester area racers, The McGraths and The Ciras, they can vouch for the mans talent and character. Message me if you'd like his contact info. Frank F. 181 H/SA __________________ F Federico NHRA J/SA

12-07-2018, 01:01 AM	#4
STK1217 Member Join Date: Nov 2006 Posts: 137 Likes: 48 Liked 10 Times in 7 Posts	Re: Stocker machinist Tilburg Racing Engines Trout Run PA.17771 570-998-2204 You will be lucky to find anyone better!

12-07-2018, 01:00 PM	#5
Bob Bender VIP Member Join Date: Jan 2009 Location: Maryland Posts: 1,737 Likes: 1,602 Liked 460 Times in 91 Posts	Re: Stocker machinist Burtonsville Machine, call Bub he is great and fast. 301-490-3131 __________________ Bob Bender 144 O/SA 2010-2012 National Record Holder

12-07-2018, 05:01 PM	#6
Steven Cappetta Junior Member Join Date: Aug 2011 Location: Sudbury, MA Posts: 14 Likes: 0 Liked 3 Times in 1 Post	Re: Stocker machinist Tom Boucher of Boucher's Racing Engines. Every time I go I walk out faster than when I went in. He is a Div 1 SuperStock racer and has been instrumental helping me tune. Vic Santos helps with the in-house Dyno testing. Over 40 years of experience building and racing. http://www.bouchersracing.com/ __________________ Steve Cappetta 1864 STK

12-20-2018, 09:29 AM	#7
dragracerray Member Join Date: May 2017 Location: Webster, New York Posts: 225 Likes: 492 Liked 217 Times in 93 Posts	Re: Stocker machinist Thanks guys! You came up with machinists I was not aware of. Merry Christmas, Ray __________________ Ray Bassett I/SA 1687, SS/DA 1687 "SuperPro is both", unknown

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode