|
|
![]() |
#1 |
Senior Member
Join Date: Aug 2003
Location: Pierce NE
Posts: 936
Likes: 77
Liked 351 Times in 120 Posts
|
![]()
There are guys running check valves from power brake units instead of the pcv valves. Its a poor mans vacuum pump. was always told if you could keep some vacuum in the crankcase say 3 in it would free up some power. Remember for all the air that is moving on top of the piston there is air moving below it also. Back in the day they said it helped ring flutter. But with todays ring combos who knows. Tom
__________________
Tom Meyer 5240 SS Stock ??? |
![]() |
![]() |
Liked |
![]() |
#2 |
Senior Member
Join Date: Jul 2014
Posts: 569
Likes: 36
Liked 53 Times in 38 Posts
|
![]()
Back in the 70s I used a hemi fuel pump hooked to a PCV on my max wedge 64 Plym (later valve covers) I did it mostly for blow by, had to use a catch can so it was doing something.
|
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Feb 2014
Location: Derby City, USA
Posts: 3,631
Likes: 1,081
Liked 7,901 Times in 1,512 Posts
|
![]()
Posting for a friend with a 2 barrel.......
He never tightens his carb bolts, and he has a hellacious throttle return spring, actually two of them.... |
![]() |
![]() |
Liked |
![]() |
#4 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,807
Likes: 2,897
Liked 5,109 Times in 1,947 Posts
|
![]()
Wasn't illegal until a bit after this picture was taken...
__________________
"We are lucky we don't get as much Government as we pay for." Will Rogers |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|