|
|
|
|
03-02-2019, 09:33 PM
|
#1 |
|
Junior Member
Join Date: Apr 2003
Posts: 45
Likes: 17
Liked 1 Time in 1 Post
|
Re: Headers
Super stock 255/294 350 sbc auto.
|
|
|
|
03-02-2019, 11:08 PM
|
#2 | |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,126
Likes: 1,583
Liked 1,881 Times in 423 Posts
|
Re: Headers
Quote:
Tri-Y or 4-2-1 headers will require an entirely different camshaft development program, and possibly both a torque converter and rear gear change, as compared to a regular 4 into 1 header. Otherwise, you just have an expensive set of headers that make your car slower.
__________________
Alan Roehrich 212A G/S |
|
|
|
|
03-03-2019, 08:17 AM
|
#3 |
|
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,504
Likes: 3,606
Liked 7,814 Times in 1,748 Posts
|
Re: Headers
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
__________________
Billy Nees 1188 STK, SS I'm not spending 100K to win 2K |
|
|
|
| Liked |
|
03-03-2019, 08:31 AM
|
#4 | |
|
VIP Member
Join Date: Nov 2002
Location: Massapequa Park,NY
Posts: 1,287
Likes: 1,907
Liked 974 Times in 310 Posts
|
Re: Headers
Quote:
__________________
1989 Camaro Iroc-Z I/SA B&B Auto Machine Shop. |
|
|
|
|
| Liked |
|
03-03-2019, 10:02 AM
|
#5 |
|
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,664
Likes: 1,954
Liked 10,835 Times in 2,252 Posts
|
Re: Headers
Our Tri-Ys were better than the Davis steps on the track and dyno. We might have been just lucky. Later we rolled the cam around and found a little more.
|
|
|
|
| Liked |
|
03-03-2019, 12:49 PM
|
#6 | |
|
Veteran Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,126
Likes: 1,583
Liked 1,881 Times in 423 Posts
|
Re: Headers
Quote:
Briefly, the intake/exhaust bias on the camshaft will be different, and likely the LSA as well. The torque curve will be different, possibly requiring a change to the torque converter. And the change in the RPM bands may require a gear change. It requires considerable testing and development, you can't just give specifics off the top of your head. And then you have to realize that the dyno may not tell you what it wants at the track.
__________________
Alan Roehrich 212A G/S |
|
|
|
|
| Liked |
|
03-03-2019, 08:38 PM
|
#7 |
|
Junior Member
Join Date: Apr 2003
Posts: 45
Likes: 17
Liked 1 Time in 1 Post
|
Re: Headers
Thanks everyone
|
|
|
|
|
03-04-2019, 08:29 AM
|
#8 |
|
Senior Member
Join Date: Feb 2010
Posts: 507
Likes: 8
Liked 358 Times in 83 Posts
|
Re: Headers
A number of guys have found that they had to reduce the clearance in the dingle arm, when going from 4-into-1 to tri-Ys. Those that didn't experienced terrible Sinusoidal Refleneration, which is exactly like radial wobble, but different.
|
|
|
|
|
03-04-2019, 08:43 AM
|
#9 |
|
VIP Member
Join Date: Dec 2008
Location: Richmond Hill GA (and Port Ludlow WA)
Posts: 4,305
Likes: 2,409
Liked 3,219 Times in 980 Posts
|
Re: Headers
[QUOTE=nhramnl;583832]A number of guys have found that they had to reduce the clearance in the dingle arm, when going from 4-into-1 to tri-Ys. Those that didn't experienced terrible Sinusoidal Refleneration, which is exactly like radial wobble, but different.[/QUOTE
__________________
Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table Last edited by jmcarter; 03-04-2019 at 08:46 AM. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
