Headers

Ralph A Powell · 03-06-2019, 08:20 PM

Ed you have a PM

Frank Castros · 03-06-2019, 10:02 PM

Has anyone on this forum had ACP build headers and if so tell us about it.

Billy Nees · 03-07-2019, 08:49 AM

Quote:

Originally Posted by Frank Castros

Has anyone on this forum had ACP build headers and if so tell us about it.

They're good guys. Greg and Shane can pretty much fix you up with whatever you'll need. They just can't call them Stahl. Lawyers, I guess.

Ed Wright · 03-07-2019, 12:24 PM

Quote:

Originally Posted by Billy Nees

They're good guys. Greg and Shane can pretty much fix you up with whatever you'll need. They just can't call them Stahl. Lawyers, I guess.

I was trying to remember the new name.

Thanks Billy!!

James Jeschke Jr · 03-08-2019, 12:56 AM

ACP is run by “Stump” which is who built my Stahls years ago. He was Jeres main guy. Basically the same company just different name and no Jere, unfortunately. Stump told me he is going to start making the same design headers that Stahl made for years out of Stainless! Something that Jere simply was against and refused to do.

Billy Nees · 03-08-2019, 08:39 AM

Quote:

Originally Posted by James Jeschke Jr

Stump told me he is going to start making the same design headers that Stahl made for years out of Stainless! Something that Jere simply was against and refused to do.

Hoo Boy! Greg (Stump) will be getting a late-night visit from the ghost of Jere over that!

Alan Roehrich · 03-09-2019, 12:30 PM

Kerry Hitt owns the Stahl stuff now, he and Jere were very close. While it is under the umbrella ofKerry's company, ACP, it is most often listed and referred to as "Stahl headers by ACP".

I hadn't heard Greg saying anything about stainless. But Greg told me that he was only building step headers now because they were almost always faster, and it was easier.

03-06-2019, 08:20 PM	#1
Ralph A Powell Member Join Date: Oct 2017 Location: Bay City Texas Posts: 390 Likes: 2 Liked 226 Times in 137 Posts	Re: Headers Ed you have a PM

03-06-2019, 10:02 PM	#2
Frank Castros VIP Member Join Date: Nov 2001 Location: The Lowcountry. Posts: 3,005 Likes: 2,686 Liked 2,755 Times in 975 Posts	Re: Headers Has anyone on this forum had ACP build headers and if so tell us about it.

03-08-2019, 12:56 AM	#5
James Jeschke Jr Junior Member Join Date: Jan 2013 Location: Pittsburgh Pa. Posts: 35 Likes: 20 Liked 19 Times in 10 Posts	Re: Headers ACP is run by “Stump” which is who built my Stahls years ago. He was Jeres main guy. Basically the same company just different name and no Jere, unfortunately. Stump told me he is going to start making the same design headers that Stahl made for years out of Stainless! Something that Jere simply was against and refused to do. __________________ James Jeschke Jr. #1603 I/S

03-09-2019, 12:30 PM	#7
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,132 Likes: 1,601 Liked 1,914 Times in 429 Posts	Re: Headers Kerry Hitt owns the Stahl stuff now, he and Jere were very close. While it is under the umbrella ofKerry's company, ACP, it is most often listed and referred to as "Stahl headers by ACP". I hadn't heard Greg saying anything about stainless. But Greg told me that he was only building step headers now because they were almost always faster, and it was easier. __________________ Alan Roehrich 212A G/S

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode