|
|
![]() |
#1 |
Senior Member
Join Date: Jan 2008
Location: 100th Meridian
Posts: 569
Likes: 116
Liked 280 Times in 139 Posts
|
![]()
Have you tried putting the bars in the top hole with 0 preload and the ext.at 10.It should hit the tire harder and may pick up the 60' a few ticks.If you leave them in the bottom hole put a 1/4 turn preload in and set the ext. at 5.See what the car likes. gsa612
Last edited by gsa612; 07-24-2019 at 03:28 PM. |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Sep 2006
Location: Moncton, N.B.
Posts: 276
Likes: 24
Liked 24 Times in 13 Posts
|
![]()
Thanks "gsa612" for the info.
I believe hitting the tires harder is not my issue. I tried the top hole, did not work. Keeping in mind that I have a 4-speed and launch at 6700. The lower hole of my Cal Tracs with "0" preload gives me the softest hit. The stick" guys I see and talk to in Div 1 all use the bottom hole for a soft hit of the tires. I believe a soft hit with a relatively hi RPM launch is just about right. Having said that, I believe the shocks are going to complete the launch. My clutch is set up just about right(I figure). I have accomplished a few 1.50 60 ft times, problem is ,not often enough and not constantly. Terry K |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Sep 2006
Location: Moncton, N.B.
Posts: 276
Likes: 24
Liked 24 Times in 13 Posts
|
![]()
"340Cuda" you have a PM.
Terry K |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|