|
|
![]() |
#1 |
Senior Member
Join Date: Jun 2007
Posts: 783
Likes: 498
Liked 288 Times in 90 Posts
|
![]()
I believe that the Edelbrock FE heads had a MR ports design, but if you take a intake gasket like you are running now and lay it on the heads with the bolt holes aligned it will tell you what you need to do. Worse case is port matching your intake manifold to the heads or vise versa.
RJ |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|