Line to Line coating

SSDiv6 · 12-07-2019, 08:02 PM

Quote:

Originally Posted by Jim Hanig

Anyone tried this on a stock or super or stocker, Did it help or hurt performance, How tight did you run the pistons?

Have tried it twice, it works and it helped bring the wall clearances back at 0.005" for 2618 alloy pistons. Also, follow the break in instructions and you will be fine.

It is being used by many professional engine builders successfully.

Alan Nyhus · 12-08-2019, 09:43 AM

Hey, Jim...I've seen Steve Koppien use it a few times, as well as several other people you would know. Some engine builders use it on fresh builds. It works. -Al

12-08-2019, 09:43 AM	#2
Alan Nyhus VIP Member Join Date: Dec 2002 Location: Lower Dakota territory Posts: 1,180 Likes: 1,074 Liked 799 Times in 236 Posts	Re: Line to Line coating Hey, Jim...I've seen Steve Koppien use it a few times, as well as several other people you would know. Some engine builders use it on fresh builds. It works. -Al __________________ "That'll never work....."

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode