Valve recommendations for Chevy

mcashman · 04-28-2020, 08:10 PM

So non tulip would slightly help fill compression if I have the cc’s in the chamber?

HP HUNTER · 04-29-2020, 08:24 PM

Typically you would start with a bigger valve and shape it down to 1.945. On the exhaust, a tulliped valve is some time used on a 23 degree head. All these modifications are based on flow testing as you go, because on a stocker IT ALWAYS comes down to flow through the intake tract. We use Ferrea valves usually.

04-28-2020, 08:10 PM	#1
mcashman Junior Member Join Date: Oct 2007 Location: Westminster MD Posts: 82 Likes: 16 Liked 6 Times in 3 Posts	Re: Valve recommendations for Chevy So non tulip would slightly help fill compression if I have the cc’s in the chamber?

04-29-2020, 08:24 PM	#2
HP HUNTER Senior Member Join Date: Feb 2012 Location: Colorado Springs Colorado/Thousand Oaks Ca Posts: 656 Likes: 82 Liked 373 Times in 129 Posts	Re: Valve recommendations for Chevy Typically you would start with a bigger valve and shape it down to 1.945. On the exhaust, a tulliped valve is some time used on a 23 degree head. All these modifications are based on flow testing as you go, because on a stocker IT ALWAYS comes down to flow through the intake tract. We use Ferrea valves usually. Last edited by HP HUNTER; 04-29-2020 at 08:27 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode