HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech

Reply
 
Thread Tools Display Modes
Old 10-06-2020, 02:56 PM   #1
Greg Reimer 7376
VIP Member
 
Join Date: Nov 2008
Location: Glendora,Calif.
Posts: 1,137
Likes: 172
Liked 719 Times in 220 Posts
Cool Re: question, G body 7.5 rear life

[QUOTE=nhramnl;625230]
Quote:
Originally Posted by Jerry Terry View Post
You are right Greg the G Vans were horrible with rear end howling new or used years ago ive had race car rear ends that didnt howl as bad as them. going back to the original question go ahead and buy the good stuff now for a 12 bolt and then no worries.

The G-van rear axle howl was always kinda figured to be attributable to the fact that the operator was driving a huge "speaker" down the road. Or maybe better referred-to as a megaphone. Pickups probably had noise too, but you just couldn't hear it in the cab.
The pick up had a separate body/frame construction so any noises created by a ring and pinion wouldn't have transferred through the body bushings between the frame and the cab. All the cars that were notorious for rear end noise were unit body as well. The van rear end and the truck were the same at that time(mid-late '70's, ) and they held up pretty well, but there could have been a lapse in the quality of the set ups. I don't know how they initially set up rear ends at the factory, but it could have needed some design engineering. My late aunt from decades ago bought a new 64 Nova wagon with a 283, a Glide and power steering and brakes. It was the first year for the 283 in the Nova and the first 10 bolt 8.20 rear end. It had a rear end howl at some speeds as well, and Novas had leaf springs attached to the unit body like the vans did. I don't remember anybody telling me that Chevelles of that era had that problem, but Chevelles always had a full frame. The Nova she had came out about 10 years prior to my entry into the world of car repairs and service. i did wish at one time I had the original block out of that car!!
Greg Reimer 7376 is offline   Reply With Quote
Liked
Old 10-06-2020, 09:24 PM   #2
jmantle
Member
 
Join Date: Feb 2008
Location: Black Creek, BC Canada
Posts: 331
Likes: 80
Liked 172 Times in 81 Posts
Default Re: question, G body 7.5 rear life

This isn't directly related but when I built the Pacer I put a V8 AMC 20 rear end in it, 8 7/8 ring gear. Thinking putting the original 6 cylinder rear end in it would pick it up, I put together an AMC 15 (Dana 35) with the 7 9/16 ring gear. Results were I didn't see any improvement in the et. I haven't broken the Dana 35 but I didn't see any gain. Same ratio in both cases.

Jim Mantle V/SA 6632
jmantle is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.