200 metric issue

MikeMoller · 11-05-2020, 10:37 AM

with the converter unbolted and pushed into the trans until it is bottomed out, you need 1/8 inch (.125) space between converter mounts and flexplate. In other words, converter mounted up needs 1/8 (.125) from being bottomed out in the trans.

Glenn Briglio · 11-05-2020, 01:04 PM

Quote:

Originally Posted by MikeMoller

with the converter unbolted and pushed into the trans until it is bottomed out, you need 1/8 inch (.125) space between converter mounts and flexplate. In other words, converter mounted up needs 1/8 (.125) from being bottomed out in the trans.

Low volume pumps sometimes require less than .125

11-05-2020, 10:37 AM	#1
MikeMoller Senior Member Join Date: May 2010 Location: Raleigh NC Posts: 637 Likes: 27 Liked 254 Times in 78 Posts	Re: 200 metric issue with the converter unbolted and pushed into the trans until it is bottomed out, you need 1/8 inch (.125) space between converter mounts and flexplate. In other words, converter mounted up needs 1/8 (.125) from being bottomed out in the trans. __________________ Mike Moller NHRA 203 Q-R-T/SA Last edited by MikeMoller; 11-05-2020 at 10:40 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode