|
|
![]() |
#1 |
VIP Member
Join Date: Dec 2001
Location: Texarkana Ark/TX
Posts: 2,446
Likes: 575
Liked 880 Times in 311 Posts
|
![]()
I forgot about the water pump. My V-6 is a Cam trigger and the magnetic pickup is on top, behind the water pump. I had a pump start leaking as we were loading the car. When we got to Ennis we made one run with a towel taped to the pump. It was leaking too bad so I took the Cheaper brand pump I carried as a spare and put it on. The car popped and missed at high RPM. We looked at plugs and ignition and all the electrical. We had one more shot of qualifying left and as I was doing my burn out the car popped on the chip... It hit me that the pump was what we changed and the problems cropped up. As I staged I turned the pump off. Good run, no 9000 RPM miss. Got back to the trailer and took the other pump apart and robbed the seal out of the electrical gremlin pump. Finished the race with no pump or miss problems. I figure that pump motor was a small radio station tuned to my ignition frequency. It wasn't playing any tunes my ignition liked...It seems like the simplest fixes can be the hardest!
__________________
Adger Smith (Former SS) Last edited by Adger Smith; 12-06-2020 at 04:52 PM. Reason: add |
![]() |
![]() |
Liked |
![]() |
#2 | |
Senior Member
Join Date: May 2004
Location: Brookfield, CT
Posts: 708
Likes: 13
Liked 319 Times in 68 Posts
|
![]() Quote:
__________________
Lee Valentine 1661 STK |
|
![]() |
![]() |
![]() |
#3 |
Sponsor
Join Date: Jan 2002
Location: Galesburg IL.
Posts: 177
Likes: 258
Liked 716 Times in 120 Posts
|
![]()
You stated earlier that you changed the ignition box and it picked up on one run. Then it returned to the loss of mph and ET.
What box are you running? Robin
__________________
STK 308 SS 3088 |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Nov 2002
Location: LONG ISLAND N.Y.
Posts: 187
Likes: 126
Liked 53 Times in 24 Posts
|
![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|