Stock 1975 Dodge Coronet. Mopar guys.

383bigblock · 12-13-2020, 07:25 PM

Interesting. Just for my own understanding why wouldn't the 190hp or 235 hp 400 engines be good as a combination? Is it because they, if I'm reading the NHRA classification correctly, have been factored to 310hp and 320hp respectively. Is the low compression that much of a hindrance? What about the 1975 360 190hp? Good combination even if its been factored to 276hp?

GTX JOHN · 12-13-2020, 09:21 PM

The 400 in our 74 Ply. Sat. is 294 iron 296 Aluminum = same engine at 310 or 320 - You would not stand a chance against us.

The 360 / 190 if a four barrel would be OK.

The 318 to be a four barrel has to be 78 up.

12-13-2020, 07:25 PM	#1
383bigblock Junior Member Join Date: Oct 2009 Posts: 10 Likes: 0 Liked 0 Times in 0 Posts	Re: Stock 1975 Dodge Coronet. Mopar guys. Interesting. Just for my own understanding why wouldn't the 190hp or 235 hp 400 engines be good as a combination? Is it because they, if I'm reading the NHRA classification correctly, have been factored to 310hp and 320hp respectively. Is the low compression that much of a hindrance? What about the 1975 360 190hp? Good combination even if its been factored to 276hp?

12-13-2020, 09:21 PM	#2
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,738 Likes: 2,823 Liked 2,490 Times in 700 Posts	Re: Stock 1975 Dodge Coronet. Mopar guys. The 400 in our 74 Ply. Sat. is 294 iron 296 Aluminum = same engine at 310 or 320 - You would not stand a chance against us. The 360 / 190 if a four barrel would be OK. The 318 to be a four barrel has to be 78 up. __________________ John Irving 741 Stock 741 Super Stock Last edited by GTX JOHN; 12-13-2020 at 09:28 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode