New Technical Inspection Addendum

[SSDiv6]

Originally Posted by Mike Taylor 3601

Two things I can tell you is about 10-12 years I had a customer done engine for 8.5X26 tire class... 5.17 1/8 like it was on a rail... they couldn't go any quicker..so finally they added 10lbs boost....go or smoke tires..5.17 on a rail..they were scratching their heads....their tuner showed them how to change run/parameters in grid..5,08 but not on a rail anymore... as long as it had those one set of parameters...5,17 on a rail no matter what...

2nd.. friends running NMCA pro mod type car told me track was throwing them.. here local starting line tight loose at 1/8.... NMCA greasy starting line greasy.. 1/8 tight said everyone was using traction control so they navigate greasy first half...he didn't have and struggled... he got one and was trying to get baseline here local...wrong number of magnets on driveshaft entered between rounds... basically made run half throttle..because traction control thought it was spinning..
so I got on Davis technology website and I was pissed... FIRST demonstration was showing data for 500'' NHRA Pro Stock..
it does traction control or consistency....
my opinion... a car is running dead on dial.... MPH is all over place pay attention..

Also, all these add-on's interface with the MSD Grid system and all brands of EFI, with the exception of Motec. Motec already has a lot of these features as part of their higher end ECU's.

As regards to the Davis Technology offerings, many of them work with non-EFI cars as long as you can read the driveshaft or wheel speed. They are also self-learning after you have set them up.