|
|
04-19-2021, 02:54 PM
|
#21 |
|
Junior Member
Join Date: Oct 2009
Posts: 10
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Stock 1975 Dodge Coronet. Mopar guys.
Who are the go-to guys for engine machining, transmission building, etc?
|
|
|
|
04-20-2021, 04:41 AM
|
#22 | |
|
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,737
Likes: 2,815
Liked 2,489 Times in 699 Posts
|
Re: Stock 1975 Dodge Coronet. Mopar guys.
Quote:
Performance in Vista Cal. It is 1 Second ++ when we need it to be! Must run 727 as 904 will not bolt in without Illegal Adapter. Pro Trans in Waco Texas did the Transmission. We break a lot of very good 8 3/4 in that heavy a car. 73 Roadrunner @ 3800 Lbs
__________________
John Irving 741 Stock 741 Super Stock |
|
|
|
|
|
05-04-2021, 02:11 PM
|
#23 |
|
Junior Member
Join Date: Oct 2009
Posts: 10
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Stock 1975 Dodge Coronet. Mopar guys.
Thanks for all the replies. John what rear gear do you run?
|
|
|
|
|
05-05-2021, 02:11 AM
|
#24 |
|
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,737
Likes: 2,815
Liked 2,489 Times in 699 Posts
|
Re: Stock 1975 Dodge Coronet. Mopar guys.
Believe it or not: 4.56 Dana with 94 Cir Goodyear Radial
Shift @ 5900 to 6000 RPM Not a High RPM Combo! Gregg Luneauk does our Short Block Brad Van Lant does our heads
__________________
John Irving 741 Stock 741 Super Stock Last edited by GTX JOHN; 05-05-2021 at 02:15 AM. |
|
|
|
|
05-24-2021, 01:01 PM
|
#25 |
|
Junior Member
Join Date: Oct 2009
Posts: 10
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Stock 1975 Dodge Coronet. Mopar guys.
Would a 383 block bored .060 over be legal.
|
|
|
|
|
05-24-2021, 05:04 PM
|
#26 |
|
Senior Member
Join Date: Dec 2002
Posts: 920
Likes: 1,147
Liked 693 Times in 205 Posts
|
Re: Stock 1975 Dodge Coronet. Mopar guys.
Yes, for a 383.
|
|
|
|
|
05-24-2021, 06:37 PM
|
#27 |
|
VIP Member
Join Date: Nov 2001
Location: The Lowcountry.
Posts: 2,999
Likes: 2,638
Liked 2,750 Times in 971 Posts
|
Re: Stock 1975 Dodge Coronet. Mopar guys.
You might want to think about a filled 400 block as well.
|
|
|
|
|
05-24-2021, 11:15 PM
|
#28 | |
|
Junior Member
Join Date: Apr 2020
Posts: 86
Likes: 531
Liked 98 Times in 31 Posts
|
Re: Stock 1975 Dodge Coronet. Mopar guys.
Quote:
|
|
|
|
|
|
05-27-2021, 10:49 AM
|
#30 |
|
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,667
Likes: 1,959
Liked 10,838 Times in 2,253 Posts
|
Re: Stock 1975 Dodge Coronet. Mopar guys.
A dana 60 for the back. Before you machine or choose an engine combination look at ring availability. The 360 with the factory 4.00" bore will have a better selection of piston rings than the 4.340 bore of the 400. Dont forget to look at rod selection on the approved list and if they are available.
Just some thoughts. |
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
