Chevelle Stocker Question

[DiMEC1]

Originally Posted by Chipper Chapman

396/375 aluminum head fits as natural B I believe, and Iron head as natural C. Neither are bad combos IMO. I started to go the 375 route a few years ago but opted to go oval port for lower rpm and maintenance. Weibes chassis parts worked very well but from what I understand he’s no longer making the stuff. The Dick Miller parts work very well too. There are a few guys running the ‘70 402/375 combo that I’m sure could help you out. As for wheels, I run 15x10 with 5.5” backspace. They Center in the wheelwells near perfectly

All good info and thank you. I will research the Dick Miller parts because as you mentioned, doesn't look like there is any way to buy the Weibe kit.

[boxmotorsports]

I have my 1969 Chevelle in G/SA with a 396/325hp combo. I have been told it has been reduced to 316hp in the Chevelle body. Check out HR Parts and Stuff, they make a anti roll type sway bar that works great. We have the same bar on our K/SA wagon.

[SSDiv6]

Originally Posted by DiMEC1

All good info and thank you. I will research the Dick Miller parts because as you mentioned, doesn't look like there is any way to buy the Weibe kit.

Mike Trumble has an Alf Weibe kit for sale in this forum.

https://classracer.com/classforum/sh...ad.php?t=80010

[tony wood]

yes i posted alf weibe rear suspension complete kit with rear springs for 1500.00 for mike trumble 713-725-5288