Rear gear purchase

SSDiv6 · 11-03-2021, 03:29 PM

If you want to reduce the drag from your front spindle bearings, use the DRP Performance Low Drag Bearing Spacer and their bearings, They will not break the bank like Ceramic bearings do.

Also, when set properly, you can torque the front spindle nut in lieu of trying to find the sweet spot to put a cotter pin. After you install the DRP Low Drag Spacer, there is no drag at all when you spin the front wheels. They make the spacers for most applications and if you have a unique application, they can custom make a spacer.

https://www.drpperformance.net/hub-components

https://www.facebook.com/cammotorspo...8796213949255/

Interesting info on bearing drag:

11-03-2021, 03:29 PM	#5
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,045 Likes: 712 Liked 1,605 Times in 583 Posts	Re: Rear gear purchase If you want to reduce the drag from your front spindle bearings, use the DRP Performance Low Drag Bearing Spacer and their bearings, They will not break the bank like Ceramic bearings do. Also, when set properly, you can torque the front spindle nut in lieu of trying to find the sweet spot to put a cotter pin. After you install the DRP Low Drag Spacer, there is no drag at all when you spin the front wheels. They make the spacers for most applications and if you have a unique application, they can custom make a spacer. https://www.drpperformance.net/hub-components https://www.facebook.com/cammotorspo...8796213949255/ Interesting info on bearing drag:

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode