Shocks

Tom Goldman · 05-16-2022, 11:01 PM

The best solution and the strongest is to install an AFCO lower mount in the control arm .
Part number A550090108X. It does require welding but it can be done on the car if you dont want to pull the arm off . I made a simple drill guide with a 1/4" hole in the middle that bolts onto the OE bolt holes . Use a 3 3/8" bimetal hole saw at low speed and you will have a perfect hole to install the mount.
I actually just completed a set tonight for a Stocker. along with Global west bushings.

05-16-2022, 11:01 PM	#5
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,477 Likes: 892 Liked 883 Times in 237 Posts	Re: Shocks The best solution and the strongest is to install an AFCO lower mount in the control arm . Part number A550090108X. It does require welding but it can be done on the car if you dont want to pull the arm off . I made a simple drill guide with a 1/4" hole in the middle that bolts onto the OE bolt holes . Use a 3 3/8" bimetal hole saw at low speed and you will have a perfect hole to install the mount. I actually just completed a set tonight for a Stocker. along with Global west bushings. Attached Thumbnails __________________ Tom Goldman 1500 SG , 1506 STK

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode