|
|
![]() |
#2 |
Senior Member
Join Date: Nov 2007
Location: Div. 6, Eastern, WA
Posts: 710
Likes: 2,677
Liked 240 Times in 112 Posts
|
![]()
I used to use 1 on my Cleveland. I'm not sure on the legality in Stock but I took it off because there was never any oil in the bowl to drain out. It was on the engine for a few years.
__________________
Dave Noll, EF/S ,?/SA 6526 |
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Feb 2014
Location: Derby City, USA
Posts: 3,647
Likes: 1,085
Liked 8,018 Times in 1,526 Posts
|
![]()
Jeff, I have seen it all in my over 40 years of running stock eliminator. Pcv, master cylinder one way valves, they are all legal.
|
![]() |
![]() |
![]() |
#4 |
VIP Member
Join Date: Dec 2001
Location: phoenix
Posts: 1,488
Likes: 66
Liked 705 Times in 282 Posts
|
![]()
Thank you. I've tried PCV, Sealed caps foam filters in covers, shields under cover all running to base of carb and have a smoking problem when running. Disconnect and smoke goes away. So I wanted to try the separator and hook back up. Hoping to find .3 gain. LOLOLOL
|
![]() |
![]() |
Liked |
![]() |
Thread Tools | |
Display Modes | |
|
|