Ford 352 push rod motor??

[Brett C]

Originally Posted by A/SA Fairlane

I tried some research on past posts about this combo but all the links are dead. Is it available as an assembled crate engine? If not is there a parts list available? Seems like an economical way to get back in class racing with a reliable low maintenance piece. I would be looking to put it in an older car for FGT\? In Super stock. Either a 67 Fairlane or a 73 Mustang Anyone have any thoughts or who is the go to? I know Dick Lux ran this in his Comet (rip) looks like the Halls put one in their 68 mustang.
Thanks for any help.

I spoke to Rusty Hall in Baytown, they have the motor out of Dick Lux’s car in theirs.

[Kirk Morgan]

The Cobra Jet 352 is a good combination. RJ and i built a car from scratch and i am in the process of building a 95 Mustang Super stock with the 352 CJ. The GT weight breaks have changed so the car can move around to many more classes. Nick Morris, Neal Rhodes and John Stock i believe are running this engine.

[BRETV]

BIll Dyer had one with a stick in his gold Mustang and that thing flew!






Bret Velde
2003 ??/SA

[SS3718]

Originally Posted by Kirk Morgan

The Cobra Jet 352 is a good combination. RJ and i built a car from scratch and i am in the process of building a 95 Mustang Super stock with the 352 CJ. The GT weight breaks have changed so the car can move around to many more classes. Nick Morris, Neal Rhodes and John Stock i believe are running this engine.

It's a decent combination but hard to overcome the 360 Drag Pak and the 130# weight difference.

Nick

[Jim Caughlin]

There is also a 428 Windsor type combo, has anyone looked into that one?

[Robin Lawrence]

Originally Posted by Jim Caughlin

There is also a 428 Windsor type combo, has anyone looked into that one?

I think that is what Larry Deforest is running.

Robin

[JHeath]

[QUOTE=Robin Lawrence;678741]I think that is what Larry Deforest is running.

Robin, you are correct, Scott Burton also has a 428 powered stocker, and Gary Richard has a 428 stocker, and a 428 powered super stocker.

There are also a 363 , and a 427 windsor combinations.

[Dave Ley]

As does D1 racer, John Cannata.

[QUOTE=JHeath;678747]

Originally Posted by Robin Lawrence

I think that is what Larry Deforest is running.

Robin, you are correct, Scott Burton also has a 428 powered stocker, and Gary Richard has a 428 stocker, and a 428 powered super stocker.

There are also a 363 , and a 427 windsor combinations.

[Brett C]

Originally Posted by Jim Caughlin

There is also a 428 Windsor type combo, has anyone looked into that one?

That is what I run in SS now.

[Kirk Morgan]

I believe Fred Henson is running the 429 Ninja engine. I hope to see him at the races.