|
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Aug 2009
Posts: 84
Likes: 3
Liked 4 Times in 3 Posts
|
![]()
If your looking for a easy and economical way to put your 57 Chevy or build a car to put into NHRA stock eliminator here you go..
More description in the photos link below. This is for the complete engine, transmission/converter, shifter, complete Moser rearend. The engine factory 220hp NHRA rated 215hp) is complete from carb to pan, dist., starter, flexplate , water pump and alternator…. Just put coil wire on and plug in distributor and go. Powerglide trans with 2.18 low gear and A-1 torque converter with roller bearing tail housing. Mid trans mount and rear trans mount. Precision performance shifter. Complete Moser 12 bolt with 5.86 gear, 35 spline spool, axles with 5/8 studs,1350 yoke,Moser disc brakes and driveshaft. Rear leaf springs Fenderwell headers with collecter tethers. Car ran 12.84 on the 13.15 index (O/SA) but needs some tuning and possibly have the converter loosened up. Low runs on everything. Priced to sell at $14.5k For everything listed above Everything is still in the car. Front and rear wheels/tires available as well. Call/text 817 521-5333 For photos/detailedinfo please click on the link below. https://www.racingjunk.com/stock-sup...-headers..html |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Oct 2013
Posts: 51
Likes: 2
Liked 24 Times in 13 Posts
|
![]()
Are you selling the cal trac bars and shocks and the front springs.what wheels do you have for it. thanks
|
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Jul 2016
Posts: 32
Likes: 106
Liked 14 Times in 7 Posts
|
![]()
please contact Lew becker -570-284-7763 ,e.s.t.,in central pa. thank you.
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|