2024 Blinder Rule Stock/SS

[MR DERBY CITY]

Originally Posted by RJ Sledge

This is the current 2023 NHRA rule book


7:8 WINDSHIELD, WINDOWS
Windshields and/or windows on all cars, when called for
under Class Requirements, must be of safety glass, Plexiglas,
Lexan, or other shatterproof material, minimum 1/8-inch thick.
Windshields may not be attached with self-locking fastener
buttons. In all Camping World Drag Racing Series and Lucas Oil
Drag Racing Series vehicles, windshields and/or windows must
be clear, without tinting or coloring, except factory-tinted safety
glass. In all other applications, windshield/window tint must
meet the applicable state requirements. Windshield/window
must be in good condition and free from cracks. Competition
number decals are permitted on any window, windshield or
backlite, except as noted in Class Requirements.

Tape of any kind prohibited on any windshield or window. The use of
any temporary or permanent shielding, including paint, that
obstructs the driver’s vision (e.g., blinders, staging aids) and that
is attached to the helmet, window or windshield is prohibited.

Permitted shielding not to exceed 4 inches by 8 inches is
permitted at this time provided that (a) it has a permanent
attachment to the vehicle, such that it requires tools for removal,
and (b) that the shielding is deemed safe by the driver in the
driver’s judgment and so long as the driver can demonstrate
to technical inspectors that the purpose of the modification
is to reduce distraction in the driver’s field of vision. By using
such a shield, the driver acknowledges and agrees that the
driver deems such modification safe in the driver’s judgment
consistent with the driver’s obligations in Section 1, Participant
Agreements and Administrative and Procedural Rules, set forth
above, and that the shield does not impair or interfere with the
safe operation of the driver’s vehicle. Tape, tie straps, binder
clips, hook-and-loop fasteners, glue, etc. are prohibited for
attachment purposes. Vehicle-mounted shielding is allowed to
pivot as long as it remains permanently attached. See General
Regulation 10:7.

RJ

Hello RJ, somehow you missed the rule revision on 1-18-2023 ……blinders are NOT allowed but factory visors mounted per OEM are ….

[RJ Sledge]

Hey MJ

I saw that and followed the note at the end to “See General Regulation 7:8”, and that’s what I posted. Clear as Mud, Huh?

I understand that there is litigation proceeding right now.

Great to see you at Indy.

RJ

[GUMP]

Originally Posted by RJ Sledge

Hey MJ

I saw that and followed the note at the end to “See General Regulation 7:8”, and that’s what I posted. Clear as Mud, Huh?

I understand that there is litigation proceeding right now.

Great to see you at Indy.

RJ

If there is really "litigation", why not share the details?

[RJ Sledge]

Not privy to the details, so I guess we will have to wait and see.

RJ

[MR DERBY CITY]

Originally Posted by GUMP

If there is really "litigation", why not share the details?

Gump , didn’t know there was litigation BUT a very well connected D-4 Superstock racer is doing his best to attempt to get the NO blinder rule rescinded …. He has had numerous conversations with California and has retained an attorney .. I guess only time will tell.

[MR DERBY CITY]

Originally Posted by RJ Sledge

Hey MJ

I saw that and followed the note at the end to “See General Regulation 7:8”, and that’s what I posted. Clear as Mud, Huh?

I understand that there is litigation proceeding right now.

Great to see you at Indy.

RJ

The pleasure was all mine …. I was there when a much younger RJ Sledge won the US Nationals. . Good Times …

[Hacksaw]

This rule will never be reversed, because it's a SAFETY ISSUE ! End of story.

[MR DERBY CITY]

Originally Posted by Hacksaw

This rule will never be reversed, because it's a SAFETY ISSUE ! End of story.

And a factory sun visor larger than 4x8 inches isn’t ?? REMEMBER , this is the same organization that told us that there was a break in at Wayne Co. speedshop ….

[Troy Henderson]

Figured you guys needed a laugh.

[jmcarter]

Originally Posted by Troy Henderson

Figured you guys needed a laugh.

Good to see your sense of humor, especially since your great product line took a big hit with the ruling.