Season averages

[Billy Nees]

Originally Posted by 4284spd

Damn Straight! All these FWD racers put skinnies on the back and thank that they are hero's racink junk!

Now don't go and trash the few Racers out there racing FWD combos! I'm the only one (to my knowledge) running "junk"!
If it's so easy, everyone would be doing it.
You should try it sometime. ;-)

[4284spd]

Originally Posted by Billy Nees

Now don't go and trash the few Racers out there racing FWD combos! I'm the only one (to my knowledge) running "junk"!
If it's so easy, everyone would be doing it.
You should try it sometime. ;-)

Not knocking the few that race FWD but your effort pales compared to the guy's running real cars! Cry all you want! You don't have the respect of real combo racers! You can be Ken's friends all you want but the 99% don't care!

[GTS340]

Possibly the 2009-2010 6.1 Challenger. Mitch has it now. That one car has been its own trail blazzer.

Paul

[Billy Nees]

Originally Posted by 4284spd

Not knocking the few that race FWD but your effort pales compared to the guy's running real cars! Cry all you want! You don't have the respect of real combo racers! You can be Ken's friends all you want but the 99% don't care!

Ya know Bob, I don't want to de-rail this thread as it's an important subject at this time. BUT just to fill you in, the most difficult part of doing a FWD combo is finding the parts! They don't exist. The pieces that the average Racer takes for granted (gears, trans, converters, cams, headers) aren't there. They need to be sourced from channels rather than the norm. A lot of thought has to go into a FWD combo.
The End.

Now about Ken, if I'm one of "Ken's friends", then he should raise his standards.

[ken robinson]

Billy were not friends you hurt my feeling ...Well if you live in the peoples republic of new jersey you need to have questionable standards... lol ... So when will they release the new HP numbers ???

[4284spd]

Originally Posted by Billy Nees

Ya know Bob, I don't want to de-rail this thread as it's an important subject at this time. BUT just to fill you in, the most difficult part of doing a FWD combo is finding the parts! They don't exist. The pieces that the average Racer takes for granted (gears, trans, converters, cams, headers) aren't there. They need to be sourced from channels rather than the norm. A lot of thought has to go into a FWD combo.
The End.

Now about Ken, if I'm one of "Ken's friends", then he should raise his standards.

Take a little winter time ribbing. We all have opinions! If you get but hurt on a public forum, drink some tea and relax! LOL

[Dave Noll]

Originally Posted by 4284spd

Not knocking the few that race FWD but your effort pales compared to the guy's running real cars! Cry all you want! You don't have the respect of real combo racers! You can be Ken's friends all you want but the 99% don't care!

Yeah? NO kidding. But I have one of each of those cars. One is liked more than the other. I'm doing what I can with both. One's a stick, one's an auto, one's RWD, the other is FWD, one has a computer OE, the other has a carburetor. One runs quite a ways under (legal), the other runs .45 over. But only 1 has skinnies. Either one take effort, a little savvy and money.

Originally Posted by Billy Nees

Now Doug could have built a '70 350/250/224 with the carb that never came on a car that NHRA (somehow) made available and I'm pretty sure that he would be wanting the indexes moved .3.
;-)

Yeah we NEED more of these.

[trode424]

Is there a place to go and see what your class average was for the year?

[Scott Loge]

Move the average trigger the 10th or 15hundred they moved the auto trigger.
Fixed!

[Cglrcng]

Originally Posted by Billy Nees

Now don't go and trash the few Racers out there racing FWD combos! I'm the only one (to my knowledge) running "junk"!
If it's so easy, everyone would be doing it.
You should try it sometime. ;-)

And I will add that I have not put skinnies on my FWD junk either...Yet!