|
|
11-28-2023, 04:28 PM
|
#11 |
|
Junior Member
Join Date: Jan 2010
Posts: 83
Likes: 0
Liked 12 Times in 6 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
The Global West steering arms lower the outer tied rod by about 5/8" actually making bump steer worse with stock suspension components. They may work with control arms that allow large degrees of caster. In my case I went from 1/4" to 1/2" toe change per side with those arms.
|
|
|
|
11-28-2023, 10:49 PM
|
#12 |
|
Member
Join Date: Dec 2018
Location: Massachusetts
Posts: 177
Likes: 205
Liked 253 Times in 95 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
You may need to bend the outer tie rod arms up or somehow lower the inner tie rod. If you take some caster out it should raise the outer tie rod ends. Bump steer can be very difficult to correct.
__________________
George Mirza D/SA 1236 ‘71 Duster 340 |
|
|
|
|
11-29-2023, 08:21 AM
|
#13 |
|
Junior Member
Join Date: Jan 2010
Posts: 83
Likes: 0
Liked 12 Times in 6 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
A GM A body is front steer. Adding positive caster raises the outer tie rod.
|
|
|
|
| Liked |
|
11-29-2023, 09:54 AM
|
#14 |
|
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 2,628
Likes: 160
Liked 759 Times in 379 Posts
|
Re: 1968-1972 GM A Body Bump Steer Kit
Have you spoken to other A body racers with Alf’s suspension pieces like Jason Line or Kevin Borgstrom?
Last edited by 1320racer; 11-29-2023 at 09:56 AM. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
