10-ounce CO2 refill

[Rich Biebel]

I had similar issues with the Biondo shifting 1-3 if pressure gets to low.
The K&R pressure switch shuts off at 110lbs and does not go on until 90 or below.
I looked to see if there was a higher pressure switch I might be able to swap in but there was nothing that I felt was the right off and back on switch,pressure wise
Mines been working fine at 100-110 lbs and I just make sure the pressure is up before a run.....
I replaced my shift cable and the shifter is much easier to shift and I have not been out racing to check both the trans and the shifting issues I've been having.
Racing takes a back seat anymore.....