|
|
![]() |
#1 | |
Senior Member
Join Date: Oct 2006
Posts: 622
Likes: 312
Liked 692 Times in 200 Posts
|
![]() Quote:
"Weight boxes (two maximum) made of 1/8-inch material may be constructed to hold small items such as shot bags, lead bars, etc., as long as box and contents do not weigh more than 100 pounds or as outlined in Class Requirements. The box must be securely fastened to the frame or crossmember with at least two 1/2-inch-diameter steel bolts"
__________________
Mike 7570 A/SA Last edited by Mike Gray; 09-23-2024 at 05:03 PM. |
|
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Jan 2009
Posts: 230
Likes: 1
Liked 81 Times in 45 Posts
|
![]()
Did not know how much or where you were putting the weight just hoping you have a smooth experience. Iam fully aware of the rules.
|
![]() |
![]() |
Liked |
![]() |
#3 | |
Junior Member
Join Date: Jul 2024
Posts: 6
Likes: 0
Liked 1 Time in 1 Post
|
![]() Quote:
BALLAST Weight box permitted. Only 100 pounds removable ballast permitted, including box (two-box maximum with 50 pounds each).Must be attached to frame or crossmember with minimum of two 1 /2-inch bolts. May not be attached to roll bar or cage. Additional ballast must be permanently attached to frame or crossmember, i.e., bolted with at least two 1/2-inch bolts per 100 pounds, with nut welded to bolt. See WEIGHT. See General Regulations 4:2. |
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Oct 2006
Posts: 622
Likes: 312
Liked 692 Times in 200 Posts
|
![]()
I think I’m good, I have two 50lb bars bolted across the trunk through the frame with two 1/2” grade 8 bolts each. I just received a new Cal-Trac weight box and it’s bolted to the frame with two 1/2” grade 8 bolts also. For the Cal-Trac box I have 45lbs of shot in 10 removable bags. That should get me enough adjustable weight for different track scales.
__________________
Mike 7570 A/SA |
![]() |
![]() |
Liked |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
See you there, bring shorts?.hot hot!
|
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|