|
|
![]() |
#1 |
VIP Member
Join Date: Jun 2002
Location: New Holland, PA Mooresville,NC
Posts: 1,163
Likes: 243
Liked 16 Times in 11 Posts
|
![]()
The QA 1s are also rebuildable and you can change the lenght also. list for $44.95 ea
__________________
Bob Pagano A/SA |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Jan 2008
Posts: 29
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
It's working good Joe. I finally ditched the 396. On the freshen we foud the factory crank to be cracked in 4 or 5 different places. Found a virgin 454 block, bored it to .030, 10.5:1 compression, brodix aluminum oval port heads, and our same little street roller cam, dual plane intake, and 750HP holley from the 396. At ~3700 we have run a best of 6.56 @ 103 with a 1.38 60' down at Farmington. Took a while to get it all dialed in suspension wise but it works pretty darn good now. Still on the little 9" radial and a lot of stocker tricks to get her to hook. Kind of a silly way to bracket race but it sure makes for a lot of fun and I have learned a lot doing it this way.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|