What balancers do you use

csjta · 09-12-2008, 08:53 PM

Fluiddampr

Never had a problem with the 2 I have owned

SSDiv6 · 09-12-2008, 10:23 PM

Quote:

Originally Posted by csjta

Fluiddampr

Never had a problem with the 2 I have owned

Fluidamper is heavier than most; does not work well in all applications either. There is an SAE paper on racing balancers and Fluidamper was not that good in dampening the harmonics and/or preventing crank flex.

69Cobra · 09-13-2008, 09:41 AM

ATI here. Our last engine had over 227 passes on it and if I didn't know any better I would've put the bearings back in it.

Tim H · 09-13-2008, 11:02 AM

Fluidamper, no problems, 468 cu in, 13 to 1 compression, 4 seasons.

Alan Warman · 09-13-2008, 09:13 PM

Thanks to every one who gave there opinion.New ATI blancer will be here on tuesday.

09-12-2008, 08:53 PM	#1
csjta Junior Member Join Date: Jul 2005 Location: Richmond, VA Posts: 66 Likes: 35 Liked 0 Times in 0 Posts	Re: What balancers do you use Fluiddampr Never had a problem with the 2 I have owned

09-13-2008, 09:41 AM	#3
69Cobra Senior Member Join Date: Aug 2007 Location: California, Ky Posts: 669 Likes: 61 Liked 2 Times in 2 Posts	Re: What balancers do you use ATI here. Our last engine had over 227 passes on it and if I didn't know any better I would've put the bearings back in it. __________________ Kris Rachford 69 Cobra 428CJ 4 Speed C/S 3032

09-13-2008, 11:02 AM	#4
Tim H VIP Member Join Date: Jan 2007 Posts: 1,042 Likes: 1,077 Liked 482 Times in 159 Posts	Re: What balancers do you use Fluidamper, no problems, 468 cu in, 13 to 1 compression, 4 seasons.

09-13-2008, 09:13 PM	#5
Alan Warman Member Join Date: May 2002 Location: San Angelo Tx Posts: 231 Likes: 0 Liked 0 Times in 0 Posts	Re: What balancers do you use Thanks to every one who gave there opinion.New ATI blancer will be here on tuesday. __________________ Alan Warman STK 4107

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode