Couple of questions about Stock

Greg Marshall · 11-10-2008, 08:47 PM

I run a 418 cubic inch windsor stroker 10.5 compression motor with World products heads which
flow 265 at 600 intake and 210 exhaust . With this combination and a 691/668 272/280 at 50 Lunati
roller cam in a 2880 lb car with 430 gears i had a 1.35 60' and the car went 10.03 1'4 mile at 133 with a small amount of moroso mechnical throttle stop (4 turns) shut off . I believe the 1/8 mile speed was 107
this was behind a C4 automatic

11-10-2008, 08:47 PM	#6
Greg Marshall Junior Member Join Date: Nov 2008 Location: White Rock,bc canada Posts: 70 Likes: 62 Liked 10 Times in 6 Posts	Re: Couple of questions about Stock I run a 418 cubic inch windsor stroker 10.5 compression motor with World products heads which flow 265 at 600 intake and 210 exhaust . With this combination and a 691/668 272/280 at 50 Lunati roller cam in a 2880 lb car with 430 gears i had a 1.35 60' and the car went 10.03 1'4 mile at 133 with a small amount of moroso mechnical throttle stop (4 turns) shut off . I believe the 1/8 mile speed was 107 this was behind a C4 automatic

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode