Aerospace Rear Brakes

Greg Hill · 12-03-2008, 07:38 PM

I had the same problem on my car and had to run one caliper on the front and one on the back. You also have to press out the bushing where the bolt goes through on one of them and turn it around. They work great and I have had no problems with them.

Greg

Bob Gullett · 12-03-2008, 07:57 PM

I was able to move the shock inboard so that I have 3/4 inch clearance now. It should be OK.

12-03-2008, 07:38 PM	#1
Greg Hill VIP Member Join Date: May 2006 Location: Louisville , KY Posts: 1,995 Likes: 68 Liked 279 Times in 68 Posts	Re: Aerospace Rear Brakes I had the same problem on my car and had to run one caliper on the front and one on the back. You also have to press out the bushing where the bolt goes through on one of them and turn it around. They work great and I have had no problems with them. Greg

12-03-2008, 07:57 PM	#2
Bob Gullett VIP Member Join Date: Mar 2002 Posts: 1,105 Likes: 57 Liked 496 Times in 115 Posts	Re: Aerospace Rear Brakes I was able to move the shock inboard so that I have 3/4 inch clearance now. It should be OK. __________________ 68 Chevy11 327 F/S

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode