Cool Cans?

[bobby]

that is a nice cool can.

[Jesse Knapp]

That's a "cool" can. Would you post dimensions of it? I'd like to know height and diameter. Would the -10 can be likewise or a bit larger/taller? Thanks.

[Chad Rhodes]

Originally Posted by Jesse Knapp

That's a "cool" can. Would you post dimensions of it? I'd like to know height and diameter. Would the -10 can be likewise or a bit larger/taller? Thanks.

I already shipped it to a customer, but to give you an idea a coke can fits perfectly inside. The -10 will be taller, aparently it will hold a Foster's Beer can

[curtis hieb]

Originally Posted by Ed Wright

"Back in the day" my cars were quicker using them. We had to run the fuel through the factory mechanical fuel pumps then, but Stockers were much more stock than todays cars. EFI cars don't have engine mounted pumps to put heat in the fuel, so I'm not sure how much it would be worth. That is something I have wanted to test. Anybody know how or if lower temps would effect fuel checks?

I think you would cool all fuel in tank because you are bypassing fuel back to tank. I would think it might help. Maybe with the hi fuel pressure it might not make a difference.Would be nice to know but since I have never seen one on fuel injected car doesnt mean someone has not tried it.

[Kenny Wigington]

Qoute by Chad- "aparently it will hold a Foster's Beer can ."

Now how in the hell did you figure THAT out !?!? Ha ha ha ha !!

[Ed Wright]

Originally Posted by Kenny Wigington

Qoute by Chad- "aparently it will hold a Foster's Beer can ."

Now how in the hell did you figure THAT out !?!? Ha ha ha ha !!

Chad does a LOT of that kind of R&D.

[Ed Wright]

Originally Posted by curtis hieb

I think you would cool all fuel in tank because you are bypassing fuel back to tank. I would think it might help. Maybe with the hi fuel pressure it might not make a difference.Would be nice to know but since I have never seen one on fuel injected car doesnt mean someone has not tried it.

Curtis, if I get time I'm going to test that this coming season. I'm too tight (or poor) to buy one, but I have talented friends. We'll make something. As small as my fuel cell is, I think I could get it all cooled down before leaving the trailer.

[Chad Rhodes]

Originally Posted by Kenny Wigington

Qoute by Chad- "aparently it will hold a Foster's Beer can ."

Now how in the hell did you figure THAT out !?!? Ha ha ha ha !!

that's what their rep told me. And Ed, if it held a handle of Crown Royal that would probably be my fault. Not much of a fosters fan

[Dick Butler]

I had wondered if once the sizing was correct to flow adequately anyone ever checked cold fuel with rich jet and lean jet versus warm fuel with rich jet . lean jet to see if it is volume or temperature we are changing with the cool can that helps. My cool can limited flow so much I deserted it and ran faster because flow picked up.(prehistoric cool can with small lines)

[Ed Wright]

Originally Posted by Chad Rhodes

that's what their rep told me. And Ed, if it held a handle of Crown Royal that would probably be my fault. Not much of a fosters fan

Chad, I would't know the difference. Diet Dr Pepper is as wild as I get.