Cylinder Head Runner Volumes

Tom Moock · 12-09-2008, 07:42 PM

Woodro, called ca. tech today, they said Pat is the one working on list for stock,also Pat will be gone for 10 days, Tom

Woodro Josey · 12-09-2008, 10:01 PM

Oh well, what can i say, it's always something!

Bruce Noland · 12-09-2008, 10:06 PM

Woodro,

Still sounds like this deal is wrapped up and will probably be announced within the time frame you suggested.

Wade_Owens · 12-12-2008, 06:07 PM

Anybody got any updates on this issue?

Wade

zracer305 · 12-14-2008, 12:41 PM

The PRI show is over, still no update?

Alan Roehrich · 12-14-2008, 08:38 PM

Look in the Lucas oil section on Monday. Bruce Bachelder said that in 2009 they would monitor port volumes in cylinder heads in Stock Eliminator, if your port volume is found to be larger than what is listed for Super Stock, you will be disqualified from that event. In 2010, there will be a published specification for Stock like there is for Super Stock.

bill dedman · 12-15-2008, 03:51 AM

Alan,

Please excuse my ignorance, but why would the port volume numbers for Stock be any different than the numbers used for Super Stock engines?

And, if they're the same, why would they need TWO lists?

Just asking.... 'cause I thought the S/S numbers WERE originally Stocker head numbers. Has that changed?

Thanks for any information!

Bill

X-TECH MAN · 12-15-2008, 07:00 AM

Quote:

Originally Posted by Alan Roehrich

Look in the Lucas oil section on Monday. Bruce Bachelder said that in 2009 they would monitor port volumes in cylinder heads in Stock Eliminator, if your port volume is found to be larger than what is listed for Super Stock, you will be disqualified from that event. In 2010, there will be a published specification for Stock like there is for Super Stock.

Its like closing the barn door after all of the cows have left the farm.

Wade_Owens · 12-16-2008, 01:29 PM

Quote:

Originally Posted by Alan Roehrich

Look in the Lucas oil section on Monday. Bruce Bachelder said that in 2009 they would monitor port volumes in cylinder heads in Stock Eliminator, if your port volume is found to be larger than what is listed for Super Stock, you will be disqualified from that event. In 2010, there will be a published specification for Stock like there is for Super Stock.

Could someone please pull this forward and post here. I cant seem to find where this is on the site......

Thanks......Wade O

12-09-2008, 07:42 PM	#1
Tom Moock Senior Member Join Date: May 2004 Posts: 801 Likes: 1 Liked 10 Times in 6 Posts	Re: Cylinder Head Runner Volumes Woodro, called ca. tech today, they said Pat is the one working on list for stock,also Pat will be gone for 10 days, Tom __________________ Tom Moock 5704 STK

12-09-2008, 10:01 PM	#2
Woodro Josey Senior Member Join Date: Jul 2007 Posts: 805 Likes: 0 Liked 3 Times in 1 Post	Re: Cylinder Head Runner Volumes Oh well, what can i say, it's always something! __________________ Woodro Josey 2002 STK

12-09-2008, 10:06 PM	#3
Bruce Noland VIP Member Join Date: Jun 2002 Posts: 1,855 Likes: 83 Liked 444 Times in 145 Posts	Re: Cylinder Head Runner Volumes Woodro, Still sounds like this deal is wrapped up and will probably be announced within the time frame you suggested. __________________ Bruce Noland 1788 STK

12-12-2008, 06:07 PM	#4
Wade_Owens Senior Member Join Date: Jul 2007 Posts: 578 Likes: 0 Liked 3 Times in 1 Post	Re: Cylinder Head Runner Volumes Anybody got any updates on this issue? Wade

12-14-2008, 12:41 PM	#5
zracer305 Member Join Date: Jul 2007 Posts: 108 Likes: 0 Liked 0 Times in 0 Posts	Re: Cylinder Head Runner Volumes The PRI show is over, still no update?

12-14-2008, 08:38 PM	#6
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,136 Likes: 1,614 Liked 1,923 Times in 432 Posts	Re: Cylinder Head Runner Volumes Look in the Lucas oil section on Monday. Bruce Bachelder said that in 2009 they would monitor port volumes in cylinder heads in Stock Eliminator, if your port volume is found to be larger than what is listed for Super Stock, you will be disqualified from that event. In 2010, there will be a published specification for Stock like there is for Super Stock. __________________ Alan Roehrich 212A G/S

12-15-2008, 03:51 AM	#7
bill dedman VIP Member Join Date: Feb 2002 Location: Conway, AR Posts: 1,739 Likes: 0 Liked 6 Times in 4 Posts	Re: Cylinder Head Runner Volumes Alan, Please excuse my ignorance, but why would the port volume numbers for Stock be any different than the numbers used for Super Stock engines? And, if they're the same, why would they need TWO lists? Just asking.... 'cause I thought the S/S numbers WERE originally Stocker head numbers. Has that changed? Thanks for any information! Bill __________________ Bill

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode