Locking Dipstick - Page 2

Michael Pliska · 01-13-2010, 03:49 PM

I picked one up yesterday. Had to pay list price at $15, but the only dealers with stock were ones I couldn't get a deal at. GMPartsDirect.com has them cheaper but their shipping was over $15! It's a basic locking dipstick that is REALLY long, so you can cut it to match your existing dipstick. I'll post photos after I cut and fit it. Hopefully the NHRA continues to accept these.

jmcarter · 01-13-2010, 05:22 PM

Best remember the locking feature requirement includes the base being secured to the trans, no more stick it in with sealant and forget it...

SCOTT SST2871 · 01-14-2010, 05:30 PM

That cavalier dipstick is part#10186847 and it lists for 8.27
scott fifield

Floyd Staggs · 01-22-2010, 05:40 PM

The Lokar unit is hard to put in on your back. The locking nut is a tight fit and there isn't much room for a wrench to turn the top piece on a t400. The trans brake selinoid is in the way. Doing it on a rack would probably be easier. Having someone else do it would be easier yet. Us old guys aren't as flexible as we once were.

Floyd Staggs · 01-22-2010, 06:36 PM

Update on Lokar dipstick. If you have a door car with not much firewall clearance the trans mount dipstick won't work. You can't get to it to fill with fluid or release the dip stick. Go with the firewall mount.
Anybody want to buy a Lokar locking dipstick trans mount for a turbo 400?

Bob Verwold · 01-26-2010, 12:45 PM

I now have an older B&M dipstick that has the rubber on top (inside) when you tighten up the handle on top it expands the rubber. Is this considered to be a locking dipstick or does it need to actually lock down ???

63corvette · 01-26-2010, 03:04 PM

Bob, that is exactly what my Hughes is and it is on the approved NHRA list.
The only difference is my Hughes is a cam expanded rubber seal like the later model GM dipsticks.
I guess we will see when we go to the first race.
I also am carrying a threaded B&M in case there is an issue.
My 2 Cents

Jim Wahl · 01-26-2010, 04:01 PM

I bought one from CPO for a 904 Mopar. When you lock the handle down it actually locks under a lip on the dipstick tube. Just sayin. Jim

FED 387 · 01-26-2010, 04:38 PM

Is NHRA worried about the dipstick coming out of the tube OR the fill tube coming seperated from the transmission case??? OR fluid coming up out of the fill tube???--Comp387

Bob Verwold · 01-26-2010, 05:00 PM

Quote:

Originally Posted by FED 387

Is NHRA worried about the dipstick coming out of the tube OR the fill tube coming seperated from the transmission case??? OR fluid coming up out of the fill tube???--Comp387

HELL who knows,....

Jim, your saying that what 63vette and I have won't pass tech ?

01-13-2010, 03:49 PM	#11
Michael Pliska Member Join Date: Oct 2008 Location: Happy Valley, OR Posts: 260 Likes: 0 Liked 0 Times in 0 Posts	Re: Locking Dipstick I picked one up yesterday. Had to pay list price at $15, but the only dealers with stock were ones I couldn't get a deal at. GMPartsDirect.com has them cheaper but their shipping was over $15! It's a basic locking dipstick that is REALLY long, so you can cut it to match your existing dipstick. I'll post photos after I cut and fit it. Hopefully the NHRA continues to accept these. __________________ Michael Pliska 643 S/G

01-13-2010, 05:22 PM	#12
jmcarter VIP Member Join Date: Dec 2008 Location: Richmond Hill GA (and Port Ludlow WA) Posts: 4,273 Likes: 2,309 Liked 3,099 Times in 954 Posts	Re: Locking Dipstick Best remember the locking feature requirement includes the base being secured to the trans, no more stick it in with sealant and forget it... __________________ Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table

01-14-2010, 05:30 PM	#13
SCOTT SST2871 Member Join Date: Oct 2008 Location: PORT ST JOHN FLORIDA Posts: 226 Likes: 0 Liked 0 Times in 0 Posts	Re: Locking Dipstick That cavalier dipstick is part#10186847 and it lists for 8.27 scott fifield

01-22-2010, 05:40 PM	#14
Floyd Staggs VIP Member Join Date: Feb 2006 Location: Cucamonga, CA Posts: 1,521 Likes: 138 Liked 223 Times in 98 Posts	Re: Locking Dipstick The Lokar unit is hard to put in on your back. The locking nut is a tight fit and there isn't much room for a wrench to turn the top piece on a t400. The trans brake selinoid is in the way. Doing it on a rack would probably be easier. Having someone else do it would be easier yet. Us old guys aren't as flexible as we once were. __________________ Floyd Staggs 787 SST

01-22-2010, 06:36 PM	#15
Floyd Staggs VIP Member Join Date: Feb 2006 Location: Cucamonga, CA Posts: 1,521 Likes: 138 Liked 223 Times in 98 Posts	Re: Locking Dipstick Update on Lokar dipstick. If you have a door car with not much firewall clearance the trans mount dipstick won't work. You can't get to it to fill with fluid or release the dip stick. Go with the firewall mount. Anybody want to buy a Lokar locking dipstick trans mount for a turbo 400? __________________ Floyd Staggs 787 SST

01-26-2010, 12:45 PM	#16
Bob Verwold Senior Member Join Date: Jul 2007 Location: Fayetteville Ohio Posts: 656 Likes: 0 Liked 0 Times in 0 Posts	Re: Locking Dipstick I now have an older B&M dipstick that has the rubber on top (inside) when you tighten up the handle on top it expands the rubber. Is this considered to be a locking dipstick or does it need to actually lock down ???

01-26-2010, 03:04 PM	#17
63corvette Senior Member Join Date: Mar 2007 Location: Canyon, Tx Posts: 551 Likes: 127 Liked 353 Times in 102 Posts	Re: Locking Dipstick Bob, that is exactly what my Hughes is and it is on the approved NHRA list. The only difference is my Hughes is a cam expanded rubber seal like the later model GM dipsticks. I guess we will see when we go to the first race. I also am carrying a threaded B&M in case there is an issue. My 2 Cents

01-26-2010, 04:01 PM	#18
Jim Wahl Veteran Member Join Date: Jan 2002 Location: Central Florida Posts: 5,843 Likes: 663 Liked 682 Times in 128 Posts	Re: Locking Dipstick I bought one from CPO for a 904 Mopar. When you lock the handle down it actually locks under a lip on the dipstick tube. Just sayin. Jim __________________ Jim Wahl....NHRA #2239 S/SS - IHRA # 8 Stock, D2 Stock Champion (forever I guess) 2019 Baby Gators Stock Champion 2009 D2 National Open Stock Champion 1981 D2 West Palm Beach LDRS SS Runner Up Past President, Southern Stock / Super Stock Association.

01-26-2010, 04:38 PM	#19
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,400 Likes: 482 Liked 320 Times in 172 Posts	Re: Locking Dipstick Is NHRA worried about the dipstick coming out of the tube OR the fill tube coming seperated from the transmission case??? OR fluid coming up out of the fill tube???--Comp387

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode