Mega 450 Wiring Help

rodrocket · 12-07-2013, 05:07 AM

Greetings all

I have a Mega 450 box & need to wire it into my car, the car was previously a manual with a Digital 7 & Koni Electronic shock control box

I don't want to tear any of the wiring out of the car as we will go back to a manual & will need the switch on the gas pedal & also the switch on the clutch pedal

I have drawn the complete wiring diagram that's in the car in Microsoft Publisher, if somebody has publisher & can help I am happy to email them the wiring diagram

regards
Rod

cad · 12-07-2013, 11:41 AM

Send me the file and I can convert it to a jpg or PDF.
cdoukas@gmail.com
Clark

RacingRicki · 12-07-2013, 08:55 PM

Do you have the manual for the Mega 450. You can download it from Digital Delay (see link below). This should help.

http://www.racedigitaldelay.com/pdfs...mega350450.pdf

Also if you have specific questions, ask away. You are more likely to get help.

rodrocket · 12-07-2013, 11:16 PM

thanks Clark, email sent

Ricki, my concern is to were to wire the box into the car, I have Penski rear shocks with the Koni controller & want to make sure that they work in Burnout mode & also Race mode

I don't believe we will need the bump up & bump down buttons so I am notcncerned with them

we don't have a start line enhancer just a plate style under carb stop

the issue's that I am up against is this car was originally a manual with the switches on the Gas & Clutch pedals to trigger the shock controller & I don't want to remove any wiring as we will put the car back to manual eventually

regards
Rod

GaryGoFast · 12-08-2013, 09:33 PM

If I understand you correctly, car was a manual and now an automatic and you need to control your electric shocks. I have Koni electric shocks with an on/ off switch by shifter as well as a micro switch on tranny linkage. The micro switch starts the timer after the 1-2 shift and the on/off switch is too reset timer after burnout or leave them off til after burnout. Really don't need the Mega involved.

rodrocket · 12-08-2013, 10:58 PM

thanks for the reply Gary

yes I have the Koni controller in the car to control the shocks & a switch above me to switch from Burnout mode to Race mode

they will need to be controlled to trigger in conjunction with the Transbrake release

the Mega 450 will also control the throttle stop

regards
Rod

12-07-2013, 05:07 AM	#1
rodrocket Junior Member Join Date: Sep 2008 Posts: 37 Likes: 1 Liked 0 Times in 0 Posts	Mega 450 Wiring Help Greetings all I have a Mega 450 box & need to wire it into my car, the car was previously a manual with a Digital 7 & Koni Electronic shock control box I don't want to tear any of the wiring out of the car as we will go back to a manual & will need the switch on the gas pedal & also the switch on the clutch pedal I have drawn the complete wiring diagram that's in the car in Microsoft Publisher, if somebody has publisher & can help I am happy to email them the wiring diagram regards Rod

12-07-2013, 11:41 AM	#2
cad Senior Member Join Date: Apr 2009 Location: Omaha, NE Posts: 691 Likes: 188 Liked 87 Times in 48 Posts	Re: Mega 450 Wiring Help Send me the file and I can convert it to a jpg or PDF. cdoukas@gmail.com Clark

12-07-2013, 08:55 PM	#3
RacingRicki Sponsor Join Date: Sep 2005 Location: Colorado Posts: 106 Likes: 0 Liked 0 Times in 0 Posts	Re: Mega 450 Wiring Help Do you have the manual for the Mega 450. You can download it from Digital Delay (see link below). This should help. http://www.racedigitaldelay.com/pdfs...mega350450.pdf Also if you have specific questions, ask away. You are more likely to get help. __________________ RacingRicki

12-07-2013, 11:16 PM	#4
rodrocket Junior Member Join Date: Sep 2008 Posts: 37 Likes: 1 Liked 0 Times in 0 Posts	Re: Mega 450 Wiring Help thanks Clark, email sent Ricki, my concern is to were to wire the box into the car, I have Penski rear shocks with the Koni controller & want to make sure that they work in Burnout mode & also Race mode I don't believe we will need the bump up & bump down buttons so I am notcncerned with them we don't have a start line enhancer just a plate style under carb stop the issue's that I am up against is this car was originally a manual with the switches on the Gas & Clutch pedals to trigger the shock controller & I don't want to remove any wiring as we will put the car back to manual eventually regards Rod

12-08-2013, 09:33 PM	#5
GaryGoFast Senior Member Join Date: Nov 2003 Location: New York Posts: 804 Likes: 0 Liked 1 Time in 1 Post	Re: Mega 450 Wiring Help If I understand you correctly, car was a manual and now an automatic and you need to control your electric shocks. I have Koni electric shocks with an on/ off switch by shifter as well as a micro switch on tranny linkage. The micro switch starts the timer after the 1-2 shift and the on/off switch is too reset timer after burnout or leave them off til after burnout. Really don't need the Mega involved. __________________ Gary Federico S/St, S/G 1814

12-08-2013, 10:58 PM	#6
rodrocket Junior Member Join Date: Sep 2008 Posts: 37 Likes: 1 Liked 0 Times in 0 Posts	Re: Mega 450 Wiring Help thanks for the reply Gary yes I have the Koni controller in the car to control the shocks & a switch above me to switch from Burnout mode to Race mode they will need to be controlled to trigger in conjunction with the Transbrake release the Mega 450 will also control the throttle stop regards Rod

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode