|
|
|
|
12-11-2017, 01:36 PM
|
#1 |
|
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,954 Times in 491 Posts
|
Jerico clutch sensor?
Anyone know someone I can send the bearing retainer to for the installation of a Racepak clutch sensor? Thanks.
__________________
Todd Greene Last edited by Nmbr1GMfan; 12-11-2017 at 01:38 PM. |
|
|
|
12-11-2017, 11:44 PM
|
#2 |
|
Member
Join Date: Sep 2009
Posts: 144
Likes: 80
Liked 88 Times in 43 Posts
|
Re: Jerico clutch sensor?
Have you checked out this thread?
Stockers make it difficult to have the sensor in the bearing retainer. http://classracer.com/classforum/sho...=clutch+sensor |
|
|
|
|
12-12-2017, 09:48 AM
|
#3 |
|
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,954 Times in 491 Posts
|
Re: Jerico clutch sensor?
Thanks Tom, I had seen that and the only person that implied he might make a kit I have PMed. Thanks.
__________________
Todd Greene |
|
|
|
|
12-12-2017, 10:56 PM
|
#4 |
|
Member
Join Date: Jan 2010
Posts: 198
Likes: 89
Liked 115 Times in 35 Posts
|
Re: Jerico clutch sensor?
When I added a data recorder with my Jerico I did not see anyway to have it read off of the input. Not enough room. I had a split collar made which installed on the cluster with a magnet in it. Drilled a hole in the case and made a adjustable sleeve to mount the sensor. The cluster is not turning at the same rpm as the input so that difference has to be calibrated in to get a accurate input reading.
|
|
|
|
|
12-13-2017, 09:16 AM
|
#5 |
|
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,954 Times in 491 Posts
|
Re: Jerico clutch sensor?
Thanks for the help everyone, I have been informed by a member here that Rob at Advanced has a kit for a collar and a drill guide, ordered it yesterday. I'll update this when it gets installed for future info.
__________________
Todd Greene |
|
|
|
|
12-13-2017, 01:52 PM
|
#6 |
|
Senior Member
Join Date: Mar 2006
Posts: 977
Likes: 792
Liked 275 Times in 76 Posts
|
Re: Jerico clutch sensor?
Todd,
Does that put the sensor in the bellhousing on the candlestick? That's where mine is on my GF5-R. When removing/reinstalling the trans I have to be careful as I have broken the sensor before. Also use adel clamps or cush clamps to hold the cable to the candlestick and away from the TOB. Sean
__________________
Sean Marconette 84 Mustang 5060 SS/N |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
