What header size - Page 2

Plyguy63 · 10-14-2018, 07:52 PM

Quote:

Originally Posted by nhrasa

I'am turning my 63 Plymouth max wedge bracket car into a class car. I was wondering if TTI 1/78inch mild steel headers would be adequate or do I need to switch to a larger diameter stainless steel header from one of the current header builders. Thanks for the responses in advance.

I am working on my 63 Max Wedge. Hasn't been down the track since 1992. Stored since. Back then used 2" Hookers. Went 11.14 back then. Was told by a guy who has run his 64 car forever that he has best results with Davis stepped headers, but $$$. Not sure what I will do for headers right now.

Alan Roehrich · 10-15-2018, 07:00 PM

Another option is Gregg Stump, who is at Stahl Headers by ACP, Kerry Hitt of ACP bought almost everything Jere had, and Gregg was Jere's master fabricator. Gregg is only building stepped headers. Yes, they're mild steel. But you can get them coated by M&R. You can start with his collectors, and buy/build merged collectors later. They're great people, affordable, reliable, and reasonable on price.

10-15-2018, 07:00 PM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,118 Likes: 1,577 Liked 1,837 Times in 417 Posts	Re: What header size Another option is Gregg Stump, who is at Stahl Headers by ACP, Kerry Hitt of ACP bought almost everything Jere had, and Gregg was Jere's master fabricator. Gregg is only building stepped headers. Yes, they're mild steel. But you can get them coated by M&R. You can start with his collectors, and buy/build merged collectors later. They're great people, affordable, reliable, and reasonable on price. __________________ Alan Roehrich 212A G/S

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode