|
![]() |
#1 |
Junior Member
Join Date: May 2009
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
ss/ta
Has anywone used a 55mm cam with std bowtie block 2" pin. and 3 625 stroke, aluminum rod. is there enough cam to rod clearance? |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Mar 2009
Posts: 27
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Yes I had this problem had to clearance the rod's No 1 2 5 and 6 touched . Did not take much
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|