Wheel bolt pattern question

Ed Carpenter · 10-07-2009, 06:57 PM

When measuring wheel bolt patterns what is the proper method to use. Outside to outside or middle of stud to stud. Thanks.

Alan Roehrich · 10-07-2009, 07:12 PM

Center of stud to center of stud.

Mark Markow · 10-07-2009, 07:19 PM

the center to center method only works with 4 or 6 lug patterns. with 5 lug patterns you measure from the center of first stud, then skip a stud and measure to the outside of the third stud.

Tim H · 10-07-2009, 07:30 PM

Quote:

Originally Posted by quadfather

the center to center method only works with 4 or 6 lug patterns. with 5 lug patterns you measure from the center of first stud, then skip a stud and measure to the outside of the third stud.

Absolutely right ... no debate

Tom Moock · 10-07-2009, 08:22 PM

Tim H, I think you are wrong, on 5 bolt wheel you measure straight across the wheel, to the center line of the bolt holes, Tom

Dave Turner · 10-07-2009, 08:31 PM

Whatever "trick" method you may choose, remember that you are measuring the diameter of a circle connecting the five studs. The distance from any stud to a point midway between two opposite studs on the arc of the circle is the correct measurement.

rallye bob · 10-08-2009, 03:15 AM

https://www.rsracing.com/tech-wheel.html

rick lester · 10-08-2009, 05:04 AM

on 5 count stud pattern; center of one stud to outer of third stud. I would assume on odd count stud pattern would be similar but not sure, ford light duty f250 with 7 stud pattern would be center on first stud to outer of fourth? on even pattern stud center of first stud to center of opposite stud. when i measured bolt pattern for my fwd h body gm (86 oldmobile delta 88) i went from center to outside and came up with 4 1/2 inches. yes a ford bolt pattern, i was able to mount 1998 ford mustang cobra wheels all the way around without any mods. looks good too. i was just wondering about the old lecars with 3 studs, how in the hell is that measured? or even the smart car?

Ed Carpenter · 10-08-2009, 07:56 AM

Thanks guys

10-07-2009, 06:57 PM	#1
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,709 Likes: 186 Liked 520 Times in 132 Posts	Wheel bolt pattern question When measuring wheel bolt patterns what is the proper method to use. Outside to outside or middle of stud to stud. Thanks. __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development

10-07-2009, 07:12 PM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,066 Likes: 1,487 Liked 1,630 Times in 378 Posts	Re: Wheel bolt pattern question Center of stud to center of stud. __________________ Alan Roehrich 212A G/S

10-07-2009, 07:19 PM	#3
Mark Markow Senior Member Join Date: Apr 2008 Location: east hartford ct. Posts: 539 Likes: 0 Liked 9 Times in 3 Posts	Re: Wheel bolt pattern question the center to center method only works with 4 or 6 lug patterns. with 5 lug patterns you measure from the center of first stud, then skip a stud and measure to the outside of the third stud. Last edited by Mark Markow; 10-07-2009 at 07:21 PM.

10-07-2009, 08:22 PM	#5
Tom Moock Senior Member Join Date: May 2004 Posts: 801 Likes: 1 Liked 10 Times in 6 Posts	Re: Wheel bolt pattern question Tim H, I think you are wrong, on 5 bolt wheel you measure straight across the wheel, to the center line of the bolt holes, Tom __________________ Tom Moock 5704 STK

10-07-2009, 08:31 PM	#6
Dave Turner VIP Member Join Date: Oct 2005 Location: Schomberg, ON, Canada Posts: 1,222 Likes: 1,606 Liked 364 Times in 138 Posts	Re: Wheel bolt pattern question Whatever "trick" method you may choose, remember that you are measuring the diameter of a circle connecting the five studs. The distance from any stud to a point midway between two opposite studs on the arc of the circle is the correct measurement. __________________ Dave Turner SS/GT #1153

10-08-2009, 03:15 AM	#7
rallye bob Member Join Date: Sep 2006 Location: Genoa, Illinois Posts: 488 Likes: 9 Liked 6 Times in 4 Posts	Re: Wheel bolt pattern question https://www.rsracing.com/tech-wheel.html

10-08-2009, 05:04 AM	#8
rick lester Member Join Date: Oct 2004 Location: Littlestown PA Posts: 163 Likes: 9 Liked 4 Times in 1 Post	Re: Wheel bolt pattern question on 5 count stud pattern; center of one stud to outer of third stud. I would assume on odd count stud pattern would be similar but not sure, ford light duty f250 with 7 stud pattern would be center on first stud to outer of fourth? on even pattern stud center of first stud to center of opposite stud. when i measured bolt pattern for my fwd h body gm (86 oldmobile delta 88) i went from center to outside and came up with 4 1/2 inches. yes a ford bolt pattern, i was able to mount 1998 ford mustang cobra wheels all the way around without any mods. looks good too. i was just wondering about the old lecars with 3 studs, how in the hell is that measured? or even the smart car?

10-08-2009, 07:56 AM	#9
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,709 Likes: 186 Liked 520 Times in 132 Posts	Re: Wheel bolt pattern question Thanks guys __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode