Need new sheetmetal question

Dave Casey · 07-28-2010, 01:38 PM

1970 Nova, need quarters, tailight panel and partial floor section. What brand is good. would like to hear from people that have bought and installed, but any advise is good. concerned on fit and finish. I doubt that any is still available from gm

Thanks

greg fulk · 07-29-2010, 12:14 AM

My old V/SA nova I got the 1/4's & L/H fender from Harmon's the fender was perfect but the 1/4's needed some "work"....scratch that the 1/4's came from Mid-West fender. I got the fender & bumpers from Harmon's & they all were top notch!

Eddies66 · 07-29-2010, 08:05 AM

Go to Steve's Nova Site for the right product and experience on who makes the best fitting product.

http://www.stevesnovasite.com/forums/index.php

Wade_Owens · 07-29-2010, 09:53 AM

Dave, call OPG and get the full qrtrs from there. The patch panels and partial pieces leave alot to be desired, but, the fulls fit perfectly.

Wade O

FINESPLINE · 07-29-2010, 12:40 PM

Harmons quarter panels have a quality fit. Used them on my 70 Nova

Dion Hildebrandt · 07-29-2010, 03:00 PM

The Goodmark brand stuff is GM licensed but I have had to modify the crap out of their 'factory fit' panels. A litlle known fact is that the Goodmark and Dynacorn panels are all made at the same place in China, I have bought Dynacorn stuff with their decal on one side and the Goodmark decal on the other side. Dont expect that any replacement panel will just fall into place, a lot of cutting and fitting will be needed no matter where you get your pieces from.

Eddies66 · 07-30-2010, 10:16 AM

The Paddock is going out of business and you might want to contact them before they completely closed the doors.

Dave Casey · 07-30-2010, 11:08 AM

I really appreciate all replies. keep'em coming
Thanks again

Johnny Rod · 07-31-2010, 07:48 AM

Dave give AMD a call 518-796-3594 Brand X garage.com There sheetmetal fits every time. Made in the USA. Stay away from Goodmark and others they SUCK.

07-28-2010, 01:38 PM	#1
Dave Casey VIP Member Join Date: Dec 2002 Location: Hampden, MA Posts: 1,194 Likes: 233 Liked 758 Times in 160 Posts	Need new sheetmetal question 1970 Nova, need quarters, tailight panel and partial floor section. What brand is good. would like to hear from people that have bought and installed, but any advise is good. concerned on fit and finish. I doubt that any is still available from gm Thanks __________________ Dave Casey 1330 STK

07-29-2010, 12:14 AM	#2
greg fulk VIP Member Join Date: Jan 2003 Location: jackson Posts: 1,165 Likes: 0 Liked 5 Times in 3 Posts	Re: Need new sheetmetal question My old V/SA nova I got the 1/4's & L/H fender from Harmon's the fender was perfect but the 1/4's needed some "work"....scratch that the 1/4's came from Mid-West fender. I got the fender & bumpers from Harmon's & they all were top notch! __________________ Greg Fulk 308 308X P/SA "ALL AMERICAN" Last edited by greg fulk; 07-29-2010 at 12:16 AM. Reason: forgot

07-29-2010, 08:05 AM	#3
Eddies66 VIP Member Join Date: Feb 2010 Location: Rancho Mirage, CA Posts: 1,308 Likes: 300 Liked 881 Times in 452 Posts	Re: Need new sheetmetal question Go to Steve's Nova Site for the right product and experience on who makes the best fitting product. http://www.stevesnovasite.com/forums/index.php

07-29-2010, 09:53 AM	#4
Wade_Owens Senior Member Join Date: Jul 2007 Posts: 578 Likes: 0 Liked 3 Times in 1 Post	Re: Need new sheetmetal question Dave, call OPG and get the full qrtrs from there. The patch panels and partial pieces leave alot to be desired, but, the fulls fit perfectly. Wade O

07-29-2010, 12:40 PM	#5
FINESPLINE Senior Member Join Date: Apr 2010 Location: Island of high taxes, N.Y. Posts: 541 Likes: 0 Liked 1 Time in 1 Post	Re: Need new sheetmetal question Harmons quarter panels have a quality fit. Used them on my 70 Nova

07-29-2010, 03:00 PM	#6
Dion Hildebrandt Member Join Date: Nov 2008 Location: calgary alberta canada Posts: 383 Likes: 0 Liked 0 Times in 0 Posts	Re: Need new sheetmetal question The Goodmark brand stuff is GM licensed but I have had to modify the crap out of their 'factory fit' panels. A litlle known fact is that the Goodmark and Dynacorn panels are all made at the same place in China, I have bought Dynacorn stuff with their decal on one side and the Goodmark decal on the other side. Dont expect that any replacement panel will just fall into place, a lot of cutting and fitting will be needed no matter where you get your pieces from. __________________ Dion Hildebrandt 6009 STK H/SA

07-30-2010, 10:16 AM	#7
Eddies66 VIP Member Join Date: Feb 2010 Location: Rancho Mirage, CA Posts: 1,308 Likes: 300 Liked 881 Times in 452 Posts	Re: Need new sheetmetal question The Paddock is going out of business and you might want to contact them before they completely closed the doors.

07-30-2010, 11:08 AM	#8
Dave Casey VIP Member Join Date: Dec 2002 Location: Hampden, MA Posts: 1,194 Likes: 233 Liked 758 Times in 160 Posts	Re: Need new sheetmetal question I really appreciate all replies. keep'em coming Thanks again __________________ Dave Casey 1330 STK

07-31-2010, 07:48 AM	#9
Johnny Rod Junior Member Join Date: Aug 2006 Location: Great River LI N.Y Posts: 90 Likes: 0 Liked 0 Times in 0 Posts	Re: Need new sheetmetal question Dave give AMD a call 518-796-3594 Brand X garage.com There sheetmetal fits every time. Made in the USA. Stay away from Goodmark and others they SUCK.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode