Doing a burn out with a 200 metic

Alan Warman · 04-19-2012, 11:33 PM

So what is the correct way to do a burn out with a metic 200. The car is 85 Olds Cutlass with a 307 Olds motor. Here is what I have been doing, starting in low,shifting to second and then to third. But when I shift to third, I loose my wheel speed and it lugs down. So now I have changed to this style, start in low shift to second and roll out of the water. The second way seems to work good. But now I have tore up the low and rev sprag.
Thanks Alan

04-19-2012, 11:33 PM	#1
Alan Warman Member Join Date: May 2002 Location: San Angelo Tx Posts: 231 Likes: 0 Liked 0 Times in 0 Posts	Doing a burn out with a 200 metic So what is the correct way to do a burn out with a metic 200. The car is 85 Olds Cutlass with a 307 Olds motor. Here is what I have been doing, starting in low,shifting to second and then to third. But when I shift to third, I loose my wheel speed and it lugs down. So now I have changed to this style, start in low shift to second and roll out of the water. The second way seems to work good. But now I have tore up the low and rev sprag. Thanks Alan __________________ Alan Warman STK 4107

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode