wheel bearing grease

christopher teed · 03-16-2015, 09:30 PM

Guys ,just wondering what everybody is using for synthetic wheel bearing grease.. I race in a pure stock drag class and use a tapered bearing..what brands to you guys recommend....and does it make a difference?thanks for any help or comments.Chris

Run to Rund · 03-17-2015, 10:09 AM

Some guys on yellowbullet recommended Lamb:
http://www.lambcomponents.com/misc-p...g-grease-p-199

tj310 · 03-17-2015, 10:19 AM

I was given a couple of tubes of synthetic grease that was designed for aircraft wheel bearings operating in the Artic . It was thin !! Ran out and never bothered to look to buy anymore. I now use snowmobile grease. I doubt there is very much to be gained here. ---Trevor

John Dinkel · 03-17-2015, 01:04 PM

I use Mobil 1. Don't know if there is anything better. There probably isn't much advantage no matter what you use.

tim worner · 03-17-2015, 02:08 PM

Valvoline SYN Power grease part#W985

Mike Washington · 03-17-2015, 05:37 PM

When I used to use grease it was Lamb. Haven't used grease since we switched over to Jack's Bearings.

FED 387 · 03-17-2015, 06:34 PM

Most any of the Lithium 220 series greases will work well--Timken/Mobil 1 ETC.

03-16-2015, 09:30 PM	#1
christopher teed Junior Member Join Date: Feb 2013 Posts: 11 Likes: 0 Liked 0 Times in 0 Posts	wheel bearing grease Guys ,just wondering what everybody is using for synthetic wheel bearing grease.. I race in a pure stock drag class and use a tapered bearing..what brands to you guys recommend....and does it make a difference?thanks for any help or comments.Chris

03-17-2015, 10:09 AM	#2
Run to Rund Senior Member Join Date: Sep 2007 Location: Henderson, NV Posts: 583 Likes: 8 Liked 54 Times in 27 Posts	Re: wheel bearing grease Some guys on yellowbullet recommended Lamb: http://www.lambcomponents.com/misc-p...g-grease-p-199

03-17-2015, 10:19 AM	#3
tj310 Member Join Date: Sep 2009 Location: Dresden On. Canada Posts: 460 Likes: 0 Liked 0 Times in 0 Posts	Re: wheel bearing grease I was given a couple of tubes of synthetic grease that was designed for aircraft wheel bearings operating in the Artic . It was thin !! Ran out and never bothered to look to buy anymore. I now use snowmobile grease. I doubt there is very much to be gained here. ---Trevor

03-17-2015, 01:04 PM	#4
John Dinkel Senior Member Join Date: Nov 2005 Location: Pinckney, Michigan Posts: 507 Likes: 394 Liked 261 Times in 68 Posts	Re: wheel bearing grease I use Mobil 1. Don't know if there is anything better. There probably isn't much advantage no matter what you use. __________________ John Dinkel 3295 STK

03-17-2015, 02:08 PM	#5
tim worner Senior Member Join Date: Jan 2002 Location: duncannon Posts: 837 Likes: 14 Liked 126 Times in 20 Posts	Re: wheel bearing grease Valvoline SYN Power grease part#W985 __________________ Tim Worner SS 1747

03-17-2015, 05:37 PM	#6
Mike Washington Junior Member Join Date: Feb 2003 Location: Long Island, New York Posts: 22 Likes: 4 Liked 6 Times in 2 Posts	Re: wheel bearing grease When I used to use grease it was Lamb. Haven't used grease since we switched over to Jack's Bearings.

03-17-2015, 06:34 PM	#7
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,399 Likes: 482 Liked 320 Times in 172 Posts	Re: wheel bearing grease Most any of the Lithium 220 series greases will work well--Timken/Mobil 1 ETC.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode