HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech

Reply
 
Thread Tools Display Modes
Old 11-25-2019, 02:01 PM   #1
Makinchips
Junior Member
 
Join Date: Apr 2016
Posts: 26
Likes: 0
Liked 3 Times in 3 Posts
Default Fuel pump requirements

What do you think the minimum pump is required on a car that goes 10.66@128. W/a 1.55 60ft. 3200lbs
This is a bracket/street car a friend has.
Makinchips is offline   Reply With Quote
Old 11-25-2019, 03:40 PM   #2
Mike Pearson
VIP Member
 
Mike Pearson's Avatar
 
Join Date: Mar 2007
Posts: 2,447
Likes: 615
Liked 1,923 Times in 578 Posts
Default Re: Fuel pump requirements

something like a Holley blue pump will get the job done. 1 gallon in 30 seconds is the flow you need on a car of that speed.
__________________
Mike Pearson 2485 SS
Mike Pearson is offline   Reply With Quote
Liked
Old 11-25-2019, 06:49 PM   #3
Jim Whitehead
Member
 
Join Date: Mar 2003
Location: MA.
Posts: 287
Likes: 153
Liked 150 Times in 41 Posts
Default Re: Fuel pump requirements

Holley Black
Jim Whitehead is offline   Reply With Quote
Liked
Old 11-25-2019, 06:56 PM   #4
pmrphil
Member
 
Join Date: Aug 2010
Location: CT
Posts: 457
Likes: 1,801
Liked 347 Times in 151 Posts
Default Re: Fuel pump requirements

Mechanical or electric?
My street car is 3260 w/me in it, runs 10.60's @127 and has a regular old Carter mechanical pump with 3/8 lines.
__________________
Phil Molski
PMR Performance
S/C 1623
pmrphil is offline   Reply With Quote
Old 11-25-2019, 06:57 PM   #5
Makinchips
Junior Member
 
Join Date: Apr 2016
Posts: 26
Likes: 0
Liked 3 Times in 3 Posts
Default Re: Fuel pump requirements

Funny how things change with the times. Is that 1gallon measurement thru 2 needle&seats at full drop?
Makinchips is offline   Reply With Quote
Old 11-25-2019, 07:52 PM   #6
Hacksaw
Senior Member
 
Join Date: Sep 2016
Posts: 882
Likes: 206
Liked 310 Times in 174 Posts
Default Re: Fuel pump requirements

Fuel pumps are rated at free flow, so if you take a Holley blue and with 3/8" lines you hold the out line in a empty fuel can and run the pump for 15 seconds you should see slightly less than .5 of a gallon. This is adequate for this combo, but IMO borderline. I would use a min. of 250 gal/hr pump. Remember that line size, bends in the lines, filters, pick up location from tank, fuel regs, and fitting choices among other things can reduce the actual flow to the carb. Take caution when checking free flow. No burns....
Hacksaw is offline   Reply With Quote
Old 11-25-2019, 09:47 PM   #7
HP HUNTER
Senior Member
 
Join Date: Feb 2012
Location: Colorado Springs Colorado/Thousand Oaks Ca
Posts: 656
Likes: 82
Liked 372 Times in 129 Posts
Default Re: Fuel pump requirements

It surprises me that theres no mention of g force on the launch, thats the whole problem with a 12 PSI fuel pump. Theres a reason bigger pumps run over 20 PSI out.
HP HUNTER is offline   Reply With Quote
Old 11-25-2019, 09:48 PM   #8
Makinchips
Junior Member
 
Join Date: Apr 2016
Posts: 26
Likes: 0
Liked 3 Times in 3 Posts
Default Re: Fuel pump requirements

He's running a single blue now.
I had freshened the engine after it ate a lifter. Upped the comp to 11.1,had the heads ported and upped the cam on his request.
Only picked up 2mph from unported heads a point less compression and a cam that's 7degrees smaller on the intake lobe.
Sorta looking for answers i guess.
Makinchips is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.