Drag Radials

[SStockDart]

Originally Posted by HawkBrosMav

We are going to put a radial slick on our car for the first time. Any suggestions on tire pressure to start with? we run about 14.5 with the regular good year 28x9 slick on a 8 in wheel.. will be going to the 30x9 goodyear radial still on an 8 in wheel.

this is an 88' mustang around 3100ish pounds 60's in the low 1.60 range @ 6000 DA as of now but we changed the rear gear from 4.88 to 5.13 as well. so I don't know what the 60's will be with the 28x9 until next weekend then we'll run the slick after we have a baseline with the old tire..

thanks guys
Brad

This is the original start to this thread.......Brad, start at 20 lbs cold, they will heat up to 22ish. Depending on your rear shocks, you can adjust from there. Loosen the shock if you spin at all.....