|
11-03-2013, 10:28 AM | #1 |
Senior Member
Join Date: Apr 2011
Location: Middletown, IN
Posts: 593
Likes: 0
Liked 0 Times in 0 Posts
|
Update E-F/SA Bird Build...
Well, guys, i have my 1st NHRA Stocker shortblock assembled. All is well... Keep in mind , this is sort of a budget build, so, i dont have the best of the best, but i believe that i have some good parts, to get goin. Heads are being done, as we speak. Hope to have it in car, early March, so i can test, before the INdy April meet. Heck, i gotta get my membership and car #! hehe... THanks for all the good advice, and support, i have recieved on CR.com. You guys rock! Here is a pic of the completed shortblock, as of this past Monday evening....
__________________
1968 Bird/TRW 455/Home ported 13's, '70 Qjet,Holley Street Dominator manifold, Comp Solid FT, 10.817/122.30/1.440 Workin' on E/SA combo 3119 E/SA |
11-04-2013, 12:17 AM | #2 |
VIP Member
Join Date: Sep 2002
Location: Tacoma, Washington
Posts: 1,632
Likes: 0
Liked 5 Times in 5 Posts
|
Re: Update E-F/SA Bird Build...
Brent,,, do you plan on taking the car to Columbus,, the 1st weekend in May for the inaugural Northern Class Nationals? It should be on every racers' bucket list for next spring. If so,, I hope to meet you there,, take care.
Danny Durham |
11-04-2013, 07:33 AM | #3 |
Senior Member
Join Date: Apr 2011
Location: Middletown, IN
Posts: 593
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Update E-F/SA Bird Build...
Hey Danny... I will have to see... Is a top 128 deal? Or an all run? Sounds like fun... If i can get it to the INdy Divisional, with no major problems, i might just have to make that one...its only 3hrs away from me
__________________
1968 Bird/TRW 455/Home ported 13's, '70 Qjet,Holley Street Dominator manifold, Comp Solid FT, 10.817/122.30/1.440 Workin' on E/SA combo 3119 E/SA |
11-04-2013, 04:15 PM | #4 |
VIP Member
Join Date: Sep 2002
Location: Tacoma, Washington
Posts: 1,632
Likes: 0
Liked 5 Times in 5 Posts
|
Re: Update E-F/SA Bird Build...
If they do it this time around like it was run in 2001 at Byron,, they had, I believe 186 stockers on the property,, and I forget how many Superstockers, which is why many referred to it as the "Woodstock" of class racing.
Nitro Joe can correct me on this if I'm off on the count,, but it was a memorable event that I'll always be glad I flew out to see it. Take care. Danny Durham |
11-05-2013, 07:42 AM | #5 |
Senior Member
Join Date: Apr 2011
Location: Middletown, IN
Posts: 593
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Update E-F/SA Bird Build...
Sounds like a good time... If i can make it, i will...Thanks!
__________________
1968 Bird/TRW 455/Home ported 13's, '70 Qjet,Holley Street Dominator manifold, Comp Solid FT, 10.817/122.30/1.440 Workin' on E/SA combo 3119 E/SA |
12-29-2013, 07:06 PM | #6 |
Senior Member
Join Date: Apr 2011
Location: Middletown, IN
Posts: 593
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Update E-F/SA Bird Build...
Finally finished wiring the MSD 6AL/2step/Blaster2 Coil up today. Got it running, set timing 34*, sounds real good...just got to tidy up some of the wires, that were there before i hooked it up. Anyone running a the same parts, and are the Blaster2 coils problematic? And should i have mounted it straight up and down? Thoughts?
__________________
1968 Bird/TRW 455/Home ported 13's, '70 Qjet,Holley Street Dominator manifold, Comp Solid FT, 10.817/122.30/1.440 Workin' on E/SA combo 3119 E/SA |
12-29-2013, 07:59 PM | #7 |
Senior Member
Join Date: Apr 2011
Location: Middletown, IN
Posts: 593
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Update E-F/SA Bird Build...
Im already hearing that i should mount coil straight up... no biggie, will correct that...
__________________
1968 Bird/TRW 455/Home ported 13's, '70 Qjet,Holley Street Dominator manifold, Comp Solid FT, 10.817/122.30/1.440 Workin' on E/SA combo 3119 E/SA |
01-17-2014, 07:21 PM | #8 |
Senior Member
Join Date: Apr 2011
Location: Middletown, IN
Posts: 593
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Update E-F/SA Bird Build...
Remounted my coil, upright... Soon as time allows, im removing heater box and adding delete plate, and then will remount on firewall... About to get my heads back... Degreed cam this past Monday eve.... gettin closer! Making plans to send my converter in , to get restalled...
__________________
1968 Bird/TRW 455/Home ported 13's, '70 Qjet,Holley Street Dominator manifold, Comp Solid FT, 10.817/122.30/1.440 Workin' on E/SA combo 3119 E/SA |
01-17-2014, 07:39 PM | #9 |
VIP Member
Join Date: Sep 2002
Location: Williamsburg, Va.---USA
Posts: 1,827
Likes: 1,612
Liked 56 Times in 27 Posts
|
Re: Update E-F/SA Bird Build...
Brent,
Glad you fixed the coil, looks much better than before ... Lookin Good !!!
__________________
Dave Ribeiro 1033 STK |
01-17-2014, 11:11 PM | #10 |
Senior Member
Join Date: Apr 2011
Location: Middletown, IN
Posts: 593
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Update E-F/SA Bird Build...
Thanks Dave!!
__________________
1968 Bird/TRW 455/Home ported 13's, '70 Qjet,Holley Street Dominator manifold, Comp Solid FT, 10.817/122.30/1.440 Workin' on E/SA combo 3119 E/SA |
|
|