|
09-20-2021, 03:14 PM | #1 |
Member
Join Date: May 2006
Location: Southwest Florida
Posts: 251
Likes: 25
Liked 35 Times in 25 Posts
|
Dual Point Corvette Distributor
Looking for a set of points for my dual point distributor, anyone have any leads or part numbers. The distributor is cast iron early corvette and has the tach drive.
Thanks
__________________
Mark Ruset 2048 STK Last edited by Mark Ruset; 09-20-2021 at 04:53 PM. Reason: additional info |
09-20-2021, 05:27 PM | #2 |
VIP Member
Join Date: Feb 2014
Location: Derby City, USA
Posts: 3,457
Likes: 992
Liked 7,169 Times in 1,387 Posts
|
Re: Dual Point Corvette Distributor
Back in the day, D112P was the Delco part number we all used ….tell me you are not using this in your stocker……
|
Liked |
09-20-2021, 05:29 PM | #3 |
Junior Member
Join Date: Dec 2014
Posts: 68
Likes: 166
Liked 14 Times in 8 Posts
|
Re: Dual Point Corvette Distributor
NAPA has them.
Bob |
09-20-2021, 10:34 PM | #4 |
Member
Join Date: Mar 2012
Posts: 239
Likes: 3
Liked 80 Times in 47 Posts
|
Re: Dual Point Corvette Distributor
fyi .. the Holley website shows their Accel ignition division shows a heavy duty / strong spring pressure points / condenser / clamp part # available for gm distributors
|
Liked |
09-21-2021, 06:21 AM | #5 |
VIP Member
Join Date: Dec 2001
Location: Texarkana Ark/TX
Posts: 2,399
Likes: 494
Liked 724 Times in 280 Posts
|
Re: Dual Point Corvette Distributor
If my memory is doing right I think the best set back in the day were made by Mallory.
Think they had an X in the part number. for extra spring tension. Sure beat doing the double spring modification.
__________________
Adger Smith (Former SS) Last edited by Adger Smith; 09-21-2021 at 06:24 AM. Reason: add |
Liked |
09-21-2021, 10:10 AM | #6 | |
Member
Join Date: Oct 2020
Posts: 262
Likes: 3,617
Liked 512 Times in 173 Posts
|
Re: Dual Point Corvette Distributor
Quote:
I believe the Good Accel points were #110129 and the regular Street points were #110128. The Mallory points were #102X - these were the Heavy Duty race points they would go 10,000 RPM on my old Sunnen Distributor machine. I used the old Accel #110129 points till I couldn't get them anymore, are they still available under a different part? Thanks in advance. Respectfully, Henry Kunz 1534 H/SA |
|
Liked |
09-21-2021, 11:03 AM | #7 |
Member
Join Date: May 2006
Location: Southwest Florida
Posts: 251
Likes: 25
Liked 35 Times in 25 Posts
|
Re: Dual Point Corvette Distributor
No it's not for my stocker, Have a 1967 Camaro street car was looking to freshen up the distributor. The car was put back on the street in 1999 and haven't done anything since then to it, Thanks for the part number
__________________
Mark Ruset 2048 STK Last edited by Mark Ruset; 09-21-2021 at 11:04 AM. Reason: spelling |
09-21-2021, 11:05 AM | #8 |
Member
Join Date: May 2006
Location: Southwest Florida
Posts: 251
Likes: 25
Liked 35 Times in 25 Posts
|
Re: Dual Point Corvette Distributor
__________________
Mark Ruset 2048 STK |
09-21-2021, 05:51 PM | #9 |
VIP Member
Join Date: Feb 2014
Location: Derby City, USA
Posts: 3,457
Likes: 992
Liked 7,169 Times in 1,387 Posts
|
Re: Dual Point Corvette Distributor
|
|
|