Help Picking a Carb: SBF in SS or GT

[FireSale]

Originally Posted by Everett Hill

accepted carb.
ssr-585-vs quick fuel
holley list 1850
holley list 2818
+ the stock holley
The 1850 picked my 289 up 1 1/2 mph.the
et was almost the same, in back 2 back test. Can not run on the 289 in class races with holley have to run 108 on mustang &112 on comet

Thanks. If I run it as a GT car, I can use the carb for a 68 Cougar 302 which NHRA lists as C8OF-D. Everything else I can find out about it says it's the carb for a 390. The specs are 600 cfm, 1536x1536/1250x1313. Under the Holley Dash rule, I should be able to run the carb in this link:

http://www.holley.com/0-80540-1.asp

Specs are 600cfm, 1536/1229 Slightly smaller, but the rule says cannot exceed.

Dale

[Everett Hill]

You don,t have to run the C80F-D on the cougar 302 in gt the 3 i listed are approved & there are some others, if you run in regular super stock you will have to run the autolite on a 68 mustang.

[FireSale]

Originally Posted by Everett Hill

You don,t have to run the C80F-D on the cougar 302 in gt the 3 i listed are approved & there are some others, if you run in regular super stock you will have to run the autolite on a 68 mustang.

Thanks again. The 1850 is probably a more sensible choice for my first try at the track. The price is right and there are ways to tune it for better performance on the track.

Dale

[jmarkaudio]

If you have to buy new get the QF carb. A friend has a B/S Camaro, the QF 780 was worth a little over the Holley 780.

[FireSale]

Originally Posted by jmarkaudio

If you have to buy new get the QF carb. A friend has a B/S Camaro, the QF 780 was worth a little over the Holley 780.

I need a 600 cdm carb and I don't think QF makes one I can use.

Thanks

Dale

[Dwight Southerland]

Look at QF SSR-585_VS that was mentioned earlier in the thread by Mr. Hill. The accepted products list shows it as a replacement for a Holley 3367, which has the same dimensions.

[FireSale]

Originally Posted by Dwight Southerland

Look at QF SSR-585_VS that was mentioned earlier in the thread by Mr. Hill. The accepted products list shows it as a replacement for a Holley 3367, which has the same dimensions.

That carb is in the QF 2014 catalogue, but I can't seem to find it anywhere to buy. Going to contact QF regarding it.

Thanks,

Dale